xps extruded styrofoam insulation sheets - XPB-008

xps foam board, Keep warm and insulate heat, Green environmental protection, Fire prevention, CE and ISO standard - details see: https://www.buildingsupplieshub.com/xps-extruded-styrofoam-insulation-sheets-10076287

Type: XPS Boards	Place of Origin: Zhejiang China (Mainland)	Brand Name: Pute	Model Number: XPB-008
Length: 1200mm-6000mm	Width: 450mm-1200mm	Thickness: 20mm-70mm	Color: as your request
Compressive Strength: 200kpa	Density: 30-65kg/m2	Moisture permeability: ≤3.0	Water absorbability: ≤0.5
Dimensional stability: ≤1.0	Thermal conductivity: ≥0.028

Xps extruded styrofoam insulation sheets

Product Description

XPS Description	XPS Shapeable Foam Boards are precut boards either in the longitudinal or transverse directions.Flexible xps boards offer fantastic flexibility in forming curves to any radius both concave convex, can be used for walls, partitions, columns, internal corners and many other designs features. It is ideal to form rounded steps around bath tubs, cladding round columns. It can be used in conjunction with all fixing accessories. All joints must be reinforced with fiberglass tape and a layer of flexible tile adhesive applied.
Colour	Pink(normal colour),Blue or as your request
Size	Length:1200mm-6000mm optional
	Width:600mm-1350mm
	Thickness:5mm-120mm
Edge Treatment	Flat(SS) type,Overlap Joint(SL) type,TG Tenon type
Surface Treatment	1.Smooth(with skin)
	2.Roughening(without skin)
	3.Line groove surface
	4.Special embossing surface

Product Feature

Common Size for XPS Board

XPS Catalogue

Technical Data

Production line

Application Examples

XPS Boards can be used as a structural tile backer board in the wall and floor. It will save you money when used in conjunction with undertile heating by acting as a very efficient thermal barrier. They reflects the heat upwards into the floor tile instead of allowing heat to warm up the concrete slab below.

Product Show

All of our XPS Boards are up to the CE / SGS / ISO9001 / ISO14001 standards.

FAQ

Does your XPS foam rot?

No, XPS foam does not rot. XPS foam is designed to be used behind walls and below grade, not as an exterior finish. It will eventually deteriorate with prolonged exposure to the sun, so it needs to be covered with a cladding.

What is the difference between regular insulation (batts or blown fill) and foam boards?
Batt and blown fill insulations (fiberglass, cellulose, etc.) are a more economical way to achieve insulation in wall cavities than foam boards. A common batt insulation used in the 3½” thickness of the cavity in a 2’ x 4’ wall structure has an R-Value of either 11 or 13. The same thickness of XPS foam board would yield an R-Value of 17.5 to 18, but at a higher cost. However, the rigidity and consistency of the XPS foam board, as well as its resistance to water, make it an excellent product for the outside of the wall, where even in thicknesses of ½” it adds an insulating R-Value of 3.0.

Packaging Detail:Plastic bag,62-65 cubic metre per 40 Feet Container

Delivery Detail:Within 10 days after receipt of the deposit (from factory)