White Polyethylene Film Surface Protection Tape Anti corrosion Coating for Underground Steel Pipe Coating - T-240, T-250, T-265, T-280, T-2100, T-2130

White Polyethylene Film Surface Protection Tape Anti corrosion Coating for Steel Pipe Coating & Steel Pipeline Corrosion Control - details see: https://www.buildingsupplieshub.com/white-polyethylene-film-surface-protection-tape-anti-corrosion-coating-for-underground-steel-pipe-coating-10089665

Type: Other Plastic Building Materials	Place of Origin: Zhejiang China (Mainland)	Brand Name: Ningbo Ideal	Model Number: T-240, T-250, T-265, T-280, T-2100, T-2130
Backing: Polyethylene PE HDPE LDPE MDPE	Adhesive: Butyl Rubber	Usage: White Polyethylene Film Surface Protection Tape Anti corrosion Coating	Certification: ISO9001:2008
Colour: White,Black,Yellow	Other Names: Protection Tape,Anti corrosion Tape,Polyethylene Tape

White Polyethylene Film Surface Protection Tape Anti corrosion Coating for Underground Steel Pipe Coating

contact supplier for White Polyethylene Film Surface Protection Tape Anti corrosion Coating for Underground Steel Pipe Coating

1. INTRODUCTION TO PRODUCTS:

Outer Tape ( White Polyethylene Film Surface Protection Tape Anti corrosion Coating for Underground Steel Pipe Coating ) Systems Description:

The Outer Tape T-200 series is cold applied Protection Tape coating systems for Protection of the pipe and its T-100 Series surface from damages. Butyl Rubber Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.

Product Advantages:

Conformable to irregular shapes.
No release liner.
Established in ground history.
Complies with AWWA (American Water Works Association) C-214 standard.
Compatible with general coating systems

T-200 Outer Tape (Protection Tape, Protection Tapes, Surface Tape) series Coating Systems with AWWA C-214 Standard:

Type of Protection Tape:		T-240		T-250		T-265		T-280		T-2100		T-2130
Thickness: (ASTM D 1000)	Total	mm	mil	mm	mil	mm	mil	mm	mil	mm	mil	mm	mil
		0.38	15	0.51	20	0.64	25	0.76	30	1.02	40	1.27	50
	Film	0.28	11	0.38	15	0.51	20	0.63	25	0.64	25	0.76	30
	Adhesive	0.10	4	0.13	5	0.13	5	0.13	5	0.38	15	0.51	20
Tensile:		29 lbs/in		39 lbs/in		39 lbs/in		53 lbs/in		66 lbs/in		78 lbs/in
Length:		60 Meter		50 Meter		40 Meter		30 Meter		25 Meter		20 Meter
Width:		2, 3, 4, 6, 9,12
Colour:		Black, White, Red, Blue, Purple, etc.
Elongation:		300%
Adhesion to Inner Layer T-100 (ASTM D 1000)		46 oz/in, 5N/10mm
Cathodic Disbandment: (ASTM G8)		0.25 in radius 6.4 mm
Water Vapor Transmission Rate: (ASTM F1249)		0.2g/100in²/24h, 0.3mg/cm²/24h
Water Absorption: (ASTM D570)		≤ 0.1
Volume Resistively: (ASTM E257)		2.5 X 10¹²ohm·cm
Dielectric Strength: (ASTM D 149)		40 KV
Temperature Range: (Normal in Ground Service)		-30 to 160^oF, -34 to 71^oC

2. POLYETHYLENE PE TAPE & PRIMER APPLICATIONS:

Rust Removal > Priming> Inner Tape & Outer Tape Wrapping

2.1 Rust Removal

Steel Surface needs treating. Its quality shall reach Sa2 or St3 grade as prescribed in GB8923-88 Pre-paint Steel Surface Rust Grade and Rust-removal Grade, and it shall be dust-free.

2.2 Priming

Primer shall be stirred well before painting. An even film of primer is painted on the steel surface that is rust-removed completely and dust-free. After the primer dries up (one may feel no sticky). The steel pipe can be wrapping with tape (it usually takes 3 to 5 minutes). The primer dosage usually amounts to 80 to 100g / m².

2.3 Inner Tape (Anticorrosion Tape) & Outer Tape (Protective Tape) Wrapping

The steel pipe that is painted with primer is wrapping with tape by means of suitable devices or tools as per joint needs, and wraps the inner tape and then wraps the outer tape. Tape tensibility can be 10 to 20 N / cm. The overlapped length between beginning and end of an adhesive tape shall be no less than 1/4 circumference of the steel pipe and the total length of adhesive tape shall be no less than 100mm. each film shall be paralleled, and must not be twisted and rumpled.

3. QUALITY CONTROL QA/QC:

Mechanical Test>Plastic Test > Electric Test > Chemical Analysis > Heat Aging Test

4. CERTIFICATIONS:

ISO9001:2008

5. PACKAGING:

Covered Tape by Polyethylene sheet,and then loaded to carton.

5. TRANSPORTATION:

Logistic Department loading and transportation.

Packaging Detail:Covered White Polyethylene Film Surface Protection Tape Anti corrosion Coating for Underground Steel Pipe Coating by polyethylene PE Release Liner and then loaded to carton.......

Delivery Detail:45 days