waterproof material bentonit Clay liner - GCL-NP/GCL-OF
Type: Geosynthetic Clay Liner | Place of Origin: Jilin China (Mainland) | Brand Name: Liu Fangzi | Model Number: GCL-NP/GCL-OF |
Material: Natural sodium bentonite | Specification: 5.8m*35m | Bentonite Swell index: ASTM D5890-2002 24ml/2g | GCL Tensile Strength: ASTM D6768-2004 103N/cm |
GCL Peel Strength: ASTM D6496-2004 709N/m | Bentonite Fluid Loss: ASTM D5891-2002 15ml | GCL Index Flux: ASTM D5887-1999 5.8X10(-9) M3/M2/S | GCL Bentonite Mass Per Unit Area: ASTM D5993-1999 4050g/m2 |
Bentonite Moisture: ASTM D4643-2008 9% | GCL Hydraulic Conductivity: GCL Hydraulic Conductivity | Woven Geotextile Mass Per Unit Area: ASTM D5261-1992 111g/m2 | Nonwoven Geotextile Mass Per Unit Area: ASTM D5261-1992 206g/m2 |
4. Usages
Our GCL is widely used in subway, basement, tunnel, ,ther underground projects ,salt water area,harsh environment , completely natural raw material ,no harm to environment or human body.
5.Standards and Tests
Material Property | Test Method | Test Results |
Bentonite Swell Index | ASTM D-5890 | 24ml/2g min |
Bentonite Fluid Loss | ASTM D-5891 | 18ml max |
Bentonite Mass/Area2 | ASTM D-5993 | 4.5kg/m2 min |
GCL Grab Strength | ASTM D-4632 | 600 N/100mm min |
GCL Peel Strength | ASTM D-4632 | 70N/100mm |
GCL Permeability | ASTM D-5887 | 3.9*10-11 m/s |
GCL Hydrated Internal Shear Strength | ASTM D-5321 | 0.4M Pa,1h, leakage |
GCL Durability | 20ml/2g min |
6. Characteristics:
1) Environment friendly. Liu Fangzi GCL is made of natural raw materials of sodium bentonite. Aging and corrosion never happen. It can keep its quality and then it does not cause any injuries and pollution for human and the environment. It is not only waterproof, but also has good ventilation performance. It can stick up for the exchange of the ecological environment. It is a pure natural, new, green waterproof material.
2) Permanent waterproof, excellent performance. Natural sodium bentonite has been formed for billions of years.Its waterproof properties are much longer than that of the buildings. Sodium bentonite would transform to high density septum under hydro pressure. When the thickness is 3mm, the permeability is below a×10-11/sec(a=1~9), which equals to the density of 100 times of the clay with 30 mm thickness. Water retention performance is evident.
3) Easy to use. Bentonite powder, nails and washers are enough for connection and fixation. Construction is not constrained by weather conditions and it could be taken under cold or wet conditions. Bentonite powder is spread on overlap point. When water comes, GCL would be overlapped automatically. It has been so far the only material that starts the waterproof effect by water in the world. It is not necessary to take additional examination when the construction is completed. The repair works are easy in case of waterproof defects. Among the existing waterproof materials, GCL’s construction period is the shortest and its operation is the easiest. It has an eminent effect on shortening the construction period as well as saving the cost.
4) Strong Self-Restore Capacity. The integration between waterproof material and its target enables GCL a 20~28 times swelling volume. Even if concrete structure trembles or subsides, the bentonite in GCL would restore the crack of 2mm or below on the concrete structure immediately. Even if the diameter of perforation reaches 30 mm, the restoration will be finished within 15 days completely.
7.Company Brief Introduction
Packaging Detail:Standard export package,or as your special requirments. |
Delivery Detail:Within one week |