Wall thermal insulation polymer mortar - CT-mortar

1:Suitable for interior and exterior wall thermal insulation., 2:Excellent flexibility, resistance to freezing and thawing, - details see: https://www.buildingsupplieshub.com/wall-thermal-insulation-polymer-mortar-10082848

Place of Origin: Shandong China (Mainland)	Brand Name: CaiTong	Model Number: CT-mortar	Usage: Plastering Mortar
Type: Mixing Mortar

Wall thermal insulation polymer mortar

Introduction :

Polymer cement mortar is made of cement , aggregates , and can be dispersed in water, the organic polymer was pressed . There is a polymer may be a homopolymer of monomer polymerization , but also by two or more monomeric polymerized copolymer . The polymer film at ambient conditions to cover the child on the cement particles , and to the cement and aggregate to form a strong body bonding. Polymer network must have the ability to prevent the occurrence of micro-cracks , and can prevent crack propagation .

Feature:

A: Bonding strength, system security.

B: Water Retention is strong, with good resistance to sliding of.

C: Excellent flexibility, resistance to freezing and thawing, good resistance to cracking and resistance.

D: Low water absorption rate, shrinkage of small.

Application :

A:Outside the walls , roof , toilet and bathroom , pool and other buildings of various parts of the waterproof , anti- seepage project ;

B:Basements, tunnels , dams , subways and other underground works waterproof , anti- seepage project ;

C:Especially suitable for aerated concrete , porous materials such as hollow brick wall plaster or brushing against leakage .

Technical indicators:

Shape	Powdery gray uniform
Bonding Strength	Original strength ≥ 1.0Mpa
	Water resistant≥ 0.8Mpa
	Freeze-thaw resistance ≥ 0.5Mpa
Operational time	≥2.0h
Pilot project	Standards Demand	Performance indicators
Tensile bond strength ( with cement mortar )	Normal condition	Mpa≥0.7 0.71
Tensile bond strength ( with cement mortar )	Water resistant	Mpa≥0.5 0.67
Tensile bond strength ( with cement mortar )	Freeze-thaw resistance	Mpa≥0.5 0.57
Tensile bond strength ( with expanded polystyrene board)	Normal condition	MPApolystyrene plate damaged more than 0.1 or 0.1 polystyrene board failure
Tensile bond strength(with expanded polystyrene board)	Water resistant	MPA polystyrene plate damaged more than 0.1 or 0.11 polystyrene board failure
Tensile bond strength ( with expanded polystyrene board )	Freeze-thaw resistance	MPA polystyrene plate damaged more than 0.1 or 0.1 polystyrene board failure