Wall Mounted Electronic Infrared Water Tap - BD-8303

The Features:
l Wall mounted sensor faucet, use infrared microprocessor control technology.
l In according environment to automatic adjust the sensing distance, and set a function with more than 1 minute to cut off the water, to avoid that some obstacles stay within sensing range result in wasting the water resource.
l Infrared microprocessor using dual sealant protection, avoid intrusion from humid moisture.
l The main body of faucet using brass tube manufactured of international standard. Plating had been through Salt Spray Test for 24 hours to reach national standard.
l To use water stainless steel bubbler will effluent water softer and prevent water-drop splash.
l There had been set prevent clogging device inside the solenoid valve, can be avoided sand to block.

The Major Parameter
l The faucet body material: solid brass with chrome finish
l Power supply: AC 220V or DC 6V (4pcs AA alkaline batteries)
l Battery life: 150,000 cycles
l Sensing range: 30cm (adjustable)
l Working temperature: 1-60°C
l Water pressure: 0.07Mpa-0.7Mpa
l Water interface: G1/2” external thread
l Response time: less than 0.5 seconds
l Water stop protection: 60 seconds
l Rated flow: when it under 0.3Mpa less than 3L/S
l Environment humidity: below 95%