Uniaxial tension geogrid soil stabilization uniaxial geogrid products - TGDG- 16
Type: Geogrids | Place of Origin: Jiangsu China (Mainland) | Brand Name: LANDLE | Model Number: TGDG- 16 |
Material: PP |

Uniaxial tension geogrid soil stabilization uniaxial geogrid products
1.High tensile strength & modulus
2.Elongation: 10%
3.Tensile strength:35~200kN
4.Width: 2~6m
Uniaxial tensile geogrid
1. Production introduction
The main raw material of Uniaxial tensile geogrid is the polymer, adding some anti-ultraviolet material, anti-aging additives, the squeeze into thin and rush into rules hole nets and then longitudinal extension.This course makes polymer directional linear state and form into uniform distribution, the nodes of the high strength oblong mesh holistic structure.This structure has quite high tensile strength and tensile modulus, close to the level of low carbon steel, is much better than the traditional or existing reinforcement material, soil to provide the ideal of the force of bear and spread of the chain system, adapt to all kinds of soil, it is widely used reinforcement material.For examplereinforcement retaining wall, reinforcement steep slope, the abutment machine road, railway, airport of the reinforced structure.
2. Product performance:
1: Uniaxial tensile geogrid used in reinforcement of weakfoundation: the geogrid can quickly improve the bearing capacity of the foundation and control the development of theLand subsidence,it can distribute the load effectively on a broader foundation,so it can reduce the thickness and cut down engineering cost. Shorten the construction period, prolong service life.
2:Uniaxial tensile geogridused for reinforcing asphalt or cement road surface: the grid laid in the bottom of the asphalt or cement layer, it can reduce rut depth, extend the pavement life, it can reduce thickness of asphalt pavement or cement, to save costs.
3:Uniaxial tensile geogrid reinforced slope and the road for retaining wall: the traditional embankment of the reclaimed often need over filling and the edge not easy compaction, it caused often happen that theSlope iscollapsed by rain, but also need longer slope, covered a big area, retaining wall also have the same problem, the grid on embankment slope or reinforce the retaining wall can reduce half area, prolong service life, reduce cost 20-50%.
4:Uniaxial tensile geogrid used for reinforcing levees rivers: it can use stone cage with grid, prevent the dam cause collapse by seawater, stone cage possess permeability, can alleviate waves, and extend the life of the dam, save manpower and material resources to shorten the construction period
5:Uniaxial tensile geogridused for processing landfills: grid and other geosynthetic materials will be used for landfill, can effectively solve the foundation the uneven settlement, derivative gas emissions, and can maximize landfills storage capacity
6:Uniaxial tensile geogridspecial purpose: Low temperature resistance. In the -45 to 60 degrees cold and heat cycle after repeated 200 times, and various performance indicators are meet the requirements, and has passed the test of the qinghai-tibet railway, apply to the north of frozen soil adverse soil
3. technical data:
Feature | unit | TGDG35 | TGDG50 | TGDG80 | TGDG120 | TGDG160 | TGDG200 |
ultimate tensile strength | KN/m | 35.0 | 50.0 | 80 | 1200 | 160 | 200 |
Elongation≤ | % | 10 | |||||
Tensile force of the 2% elongation | KN/m | 10.0 | 12.0 | 26.0 | 36.0 | 45.0 | 56.0 |
Tensile force of the 5% elongation | KN/m | 22.0 | 28.0 | 48.0 | 72.0 | 90.0 | 112.0 |
4. Production and Engineering
5. More pictures of our goods
....
....
Packaging Detail:Wideth 2~6mPacked in roll covered by PP fabricbulk/container |
Delivery Detail:20days |