Surface Mortar of ETICS based on EPS - SA802

Grey

Field of application:

Applied as substrate render on XPS, EPS mineral wool thermal insulation panels at all buildings.
The function of this product is to protect the polystyrene board and fix the mesh. The finishing coat can be paint,render,plaster etc

Application substrates :

• On interior and exterior walls;
- XPS (extruded polystyrene),
- EPS (expanded polystyrene),
- Mineral wool,
Please consult us for all other application substrates.

Remarks:

1)Only mix with water, no other addition

2)The temperature of air and coat mortar must be from 5°C~35°C

3)The coat mortar must be used up in 3h

4)Avoid sunshine, high temperature and freezing

5)Avoid strong wind during application

6)Avoid rain during application

Consumption

Application properties :

•Pot life :1 hours
•Application thickness :4 mm
•Coat thickness :Max. 2 mm
•Time between the coats :3-4 hours
Tools

electric-mixer,trowel,bucket

Substrate requirement

1) polystyrene board must be clean (no dust or dirt)

2)polystyrene board must be fixed stably (Wait min 24h before applying shunan.therm epsad

3)The surface of the whole EPS/XEPS wall must be level
Preparation

1)EPS foamboards must be fixed stably