spring door - VW-FS-08

1, Item name: Floor Spring

2, Item number: VW-FS-08

3, Cover material: stainless steel 201 / 304

4, Machine body material: iron

5, Cover finish: mirror / matt / titanium

6, Cover shape : in one part / in two parts

7, Cover size: 270 * 125 mm

8, Box size: 270 * 103 * 50 mm

9, Side: left / right

10, Door size: 1100 * 2100 mm

11, Door thickness: 8 – 12 mm glass

12, Door bearing weight: 75 - 110 KGS

13, Door opening degree: ≤ 105 °C

14, Packing: 4 pcs / carton

15, Arbitrariness orientation function degree: 90 °C - 105 °C

16, Available door : toughened glass door, wooden door, aluminum alloy door

17, Function: suitable for the left, right door open and single, double action.

18, Item pictures in details:

19,Item’s dimension of appearance:

20,Item’s accessories for glass door:

21,Item’s door adjustment:

22,Right installation place picture:

23,Installation pictures:

24,Remarkable character

. The body is thin and beautiful, used imported spring, can run 50 thousand times

. Used low temperature and resist freeze hydraulic pressure oil, keep the door smooth when it is -40°C cold

. After special design, control the bearing of the spring hinge, lighten the strength when open and close the door

. High the strength and leak prevent configuration were used for extend the life of it. As it can avoid mangle and oil leak by strength or strong wind from outside

. Cement box can be adjust 5mm length and 5mm width, portrait adjust ±2° when calibrate zero site. It makes products installation easier

25,Frequently products using-problems and the way of deal with :

1) It make different voice when close and open the floor spring:

. Use other badness products with our products and make assort fail

. The screw not be fixed close

. Put the other thing under the rocker

. Polish the products self and make the size error

2) the glass break when use the patch fitting

. Must use the toughened glass door

3) resetting error

. The fix screws not be very close and the body rock

23, suggestions on floor spring selection:

1) Selection of different models of floor springs is mainly based on glass door weight

2) Calculation of glass weight: according to national standard, 1mm thick common and toughened glass is 2.5kg per square meter. As to 12mm thick, 2.3m high and 1m width glass door commonly used in the country at present, the weight shall be 2.3*1*12*2.5=69kg

3) The weight of the entire door can be got by adding up the weight of all accessories and the weight of glass door

4) If the heavy-duty floor spring is chosen for a light weight glass door, the cost will increase, and you can not obtain good opening effect because it is heavy-duty

5) If floor spring with inadequate weight bearing is chosen to reduce project costs, it will directly influence service life of the floor spring

6) For on outside door, taking wind power into consideration, twin-cylinder floor spring should be chosen regardless of door size. This is because twin-cylinder floor spring is better than single-cylinder floor spring for the 0°Orem position and 90°Orem position

7) In cold area, floor spring with anti-icing hydraulic oil injected should be chosen, so as to prevent malfunction of floor spring at a very low temperature