Southeast Asia Rosewood,Glossy,Horizontal,Carbonized bamboo flooring,HCW2G - HCW2G

PRICE ITEM:FOBSHANGHAI

4.Standard: ISO9001:2008

5.Moisture:6%~10%

6.Gross weight: 11kg/sqm

7.Installation: Float; Nail-dawn

8.Warranty: more than 20 years

9.Structure: solid bamboo sheet with knots hot pressing shaped

10.Tongue & groove: double (thickness:17mm) or single (thickness:15mm)

11.Treatment:High-temperature & high-pressure carbonized, degreased, desugar, dehumidification

12.Finish: lacquered with water based paint, anti-wear paint, eco-friendly and nontoxic UV coating

Advantage of KANGLI bamboo flooring:

1. Hardness with high density, Split-resisting and Wear-resisting.

2. Not easy to be out of shape and split under dry condition

3. Fresh,Envionmentally and Friendly with elegance.

4. little color difference, fine tissues,high elasticity.

Nail Down Method:

1. Make sure the ground is dry , level , and clean prior to installation.

2. Select 30*40mm or 20*20mm dry wooden strips for subfloor and use setscrew to fasten them on the ground with an

space of about 300mm between each strip.

3. Cover the moistureproof film on the subfloor.

4. Since bamboo is a natural product, color variation may occur. We recommend color matching prior to installation of

bamboo floor.

5. Put the first floorboard on the subfloor. Be sure to leave a 10mm~15mm expansion space between the floorboard and

wall. The gap will be covered by skirting board.

6. Do not fasten each plank too close ; drill a hole on the tenon of the plank to avoid any damage of plank, then nail the

tenon over the wood subfloor at 45 degree angle to the face.

7. It is recommended that floors be fastened closer in dry area than in damp area.

Floating Floor Installation:

1. Make the ground level and free of contaminants.

2. Cover the moisterproof film on the ground and make it smooth.

3. Put wooden blocks at the foot of all walls prior to installing the first floorboard; begin to lay with the long side toward

the long wall.

4. Lay the cross tongue side of the first plank against the wooden block; Connect the short side of the second plank

with mating side of the first plank; Continue to lay the planks in order.

5. Once the floor is complete, remove the wooden blocks. It is better to put flexible spring in the gap.

6. Use the skirting board to cover the gap between the flooring and the wall by nailing the tenon of the skirting board

on the wall.

NOTE: FOR PERFECT INSTALLATION, PLEASE ASK SKILLED WOKERS TO INSTALL THE FLOOR.

Installation Notes:

1.Make sure that the ground is flat and dry before installation.

2.The keels for the basis frame must be dry and sturdy enough.

3.No water borne glue allowed in installation in case of dampness and distortion.

4.Prevent water of washing room, kitchen and balcony from soaking the flooring area.

5.Serious operation is needed in damp season in case of distortion.

6.The cutting section of flooring boards should be coated with damp proof lacquer in caw of being damp.

7.The flooring boards must be balanced at least 24 hours before installation in order to adapt to indoor climate; the

period of balance will be different according to temperature and humidity.

8.Undo 4~5 cartons of flooring boards and scatter the boards of chromatic aberration when installation.

9.The bamboo floor can be used after 24 hours when finishing installation.