soundproofing material leather wall panels noise barrier - BYHB008

highway noise barrier, 1.experienced factory, 2.ISO9001:2008, 3.have in stock,sample free, 4.welcome inquiry any time ! - details see: https://www.buildingsupplieshub.com/soundproofing-material-leather-wall-panels-noise-barrier-10091697

Type: Sound Barriers	Place of Origin: Hebei China (Mainland)	Brand Name: Boyang	Model Number: BYHB008
highway noise barrier thickness: 0.8mm-20mm	highway noise barrier color: silver,blue,green etc	highway noise barrier standard: ISO9001:2008

Noise barrier

The sound barrier panels covered by this specification shall be manufactured and installed having an acoustically perforated absorptive surface with the absorptive side facing the primary noise source.

The sound barrier wall system shall be a modular design that is resistant to water/moisture, non-corrosive, non-conductive, lightweight, and be made in any color to match customer requirements.

Panels
The panels shall be produced by injection molding to form an encasement or box type unit. The molding material is a high-density polyethylene with antioxidant additives, UV stabilizers, color dyed from certified raw material.

Longitudinally arranged channel sections on the bottom of the panel to form a tongue and groove interlock joint when stacked. The interior base plate is sloped and has weep holes for drainage. Internal ribs are provided for ventilation and to hold the acoustic filler materials in place.

Each panel is furnished with a fluted sheet pile configuration, solid faced on one side and with a 23% open perforated area on the opposite side. Both sides may be perforated for special applications.

End connections shall be a tongue and groove design with overlapping contacts to assemble with vertical columns of standard W4 x 13 beams. No screws or bolts are needed to install the panels to structural steel columns.

When panels are completely packed with acoustic materials, they shall not weight more than 5 pounds per square foot. The LSE 1000 total panel weight is 11.75 pounds. The LSE 2000 total panel weight is 23.25 pounds. The square area for the LSE 1000 and 2000 panels is 2.50 and 5.00 Sq. Ft. respectively.

Acoustical Fill
Internal absorptive fill material shall be 6.0 pounds per cubic foot density mineral acoustic fiber packed under not less than 5% compression to eliminate voids. It shall be moisture and corrosive resistant, vermin proof, non-combustible, smokeless, and odorless. The mineral fiber fits into the panel cavity against the perforated face.

The internal acoustic barrier or septum shall be a 0.5-inch thick asphalt core impregnated sheathing board or a cement type board of the same thickness and attaches against the back face of the panel.

Physical Dimensions

	LSE 1000	LSE 2000
Length	38.75”	73.00”
Width	6.00”	6.00”
Height	10.50”	10.50”
Stack Height	9.87”	9.87”
Area	2.5sf	5.0sf
Weight/SF	5.0lbs.	5.0lbs.
Panel Weight	11.75 lbs.	23.25 lbs.