Smooth Side HDPE Geomembrane - HDPE
Type: Geomembranes | Place of Origin: Shandong China (Mainland) | Brand Name: Starring | Model Number: HDPE |
Material: HDPE | Thickness: 0.3-3.0mm | Width: Max 8 meters | Length: 50m(as request) |

* Good chemical resistance
* Resistant to ozone and UV
* Soil covering not required
* Manufactured in thinknesss ranging from 20-120mil
* Requires installation by trained and certified crews
* Lagoon liners
* Pond liners
* Agriculture pond liners
* Canal Linings
* Raw water treatment reservoirs
* Potable water reservoirs
* Retention ponds
* Floating covers
* Secondary containment for above ground strorage tanks
* Tank linings
* Waste water treatment lagoons
HDPE is a very technical product to install properly. HDPE requires specialized welding equipment and certified welding technicians to be installed properly. The most common method of securing the liners on side slopes is by means of an anchor trench around the perimeter. A batten strip or an embed channel system is used to attach the liner to structures.
No. | Item | Test Value | ||||||
0.75mm | 1.0 mm | 1.25 mm | 1.5 mm | 2.0 mm | 2.5 mm | 3.0mm | ||
1 | Minimum Density(g/cm³) | 0.939 | ||||||
2 | Tensile Property | |||||||
Strength at yield,N/mm | 11 | 15 | 18 | 22 | 29 | 37 | 44 | |
Strength at break ,N/mm | 20 | 27 | 33 | 40 | 53 | 67 | 80 | |
Elongation at yield,% | 12 | |||||||
Elongation at break,% | 700 | |||||||
3 | Tear Resistance N | 93 | 125 | 156 | 187 | 249 | 311 | 374 |
4 | Puncture Resistance N | 240 | 320 | 400 | 480 | 640 | 800 | 960 |
5 | Stress Crack Resistance, hrs | 300 | ||||||
6 | Carbon Black Content, % | 2.0-3.0 | ||||||
Carbon Black Dispersion | 1 or 2 | |||||||
7 | Standard OTI Min | 100 | ||||||
High Pressure OTI Min | 400 | |||||||
8 | Impact Cold Crack at -70°C | Pass | ||||||
9 | Water vapor permeability (g.cm/cm2 .s.Pa) | ≤1.0×10-16 | ||||||
10 | Dimensional Stability (%) | ±2 |
Packaging Detail:PE Film or Woven bags |
Delivery Detail:Within 15 days |