Single component rubber waterproof coating - YY-868

Single component rubber waterproof coating

YY868

YunyanSingle component rubber waterproof coatingbring in the latest foreign technology, using imported technology and raw material to produce a new type of pure polyurethane waterproof coating,it overcomes the two-component polyurethane waterproof coating nee to blend before using,and mixing uneven will cause performance decline, etc.

1.Pure polyurethane, curing film after the coating to absorb moisture in the air and base moisture;

2.One-component does not need to mix, the coating will become tenacity and high elastic after curing;

3.The adhesive power is strong, stable performance, heat resistant to cold an hot(-40 °C—95 °C), chemical

corrosion resistance, ageing resistance;

4.The basic color is brown red , also can make other colors.

1.The structure of the flat and sloping roof, roof gutter, canopy, basement, floor, bathroom, parterre, waterproof engineering of the pool;

2.All kinds of sealed waterproof for doors and windows, the cracks.

1.The construction base should level and smooth, clean,firm and dry;

2.Coating thickness is greater than 2 mm, can be divided into 2-3 times to scrape and brush, the interval time is according to above coating do not glue the hand, the scrape and bursh direction of the coating should be perpendicular to each other;

3.Reference dosage(1mm thickness) 1.2-1.5kg/square meter;The thickness of the construction is 1.2-2.0/mm.

1.Seal immediately after opening, to prevent curing and scrap cause absorption of moisture, advice to use up for one-time after open;

2.When product storage period is long, there is a thin layer of glue on the coating surface , get rid of the layer when using, shall not affect the use;

3.The construction temperature should be above 5 °C, construction environment should keep ventilation.

1. This product is not flammable items,should prevent crashing during transportation, weathered, keep the package complete;

2.Packed in sealing iron drum , storage period is 6 months, 25 kg/barrel.

Reference dosage:3.2-3.5kg/square meter

Executive standard: GB/T 19250-2003