Silver brushed aluminum composite panel - LQAPEM

Mirror/Brush Aluminum composite panel., High reflectivity>=85%., Non-breakable, Light weight., High strength, anti-impact - details see: https://www.buildingsupplieshub.com/silver-brushed-aluminum-composite-panel-10000204

Place of Origin: Shandong China (Mainland)	Brand Name: SIWEI	Model Number: LQAPEM	Usage: Indoor
Surface Treatment: PE Coated,PVDF Coated	Product Name: Glassless Mirror Aluminum composite panel	Structure: Mirror Alum sheet+LDPE+Mill finish aluminium sheet	Feature: Un-breakable

contact supplier for Silver brushed aluminum composite panel

Silver brushed aluminum composite panel high constrast brush aluminum color

1. Product Name: Wood/marble color Aluminum Composite Panel (Aluminum Plastic Composite Panel)

2. Aluminum Composite Panel for builing cladding is made by two layer of Aluminum skin (Alloy type: AA1100/3003/5005), with core material low density polyester(non-toxic) though thermo- laminating technology.

3. Introduction of Core material PE.

Core material is LDPE, full name is Low density polyethylene. LDPE is the low density version of PE. This has less hardness, stiffness and strength compared to HDPE, but better ductility. It is opaque and only thin foils can be transparent.

Features of LDPE
Light-weight	No moisture absorption
Good impact resistance	Meets food handling guidelines
Extremely flexible	Chemical-and corrosion-resistant
Easily cleaned	Thermoforming performance

Alternative: High class B1 grade fireproof low density polyethylene upon customers' requirement

4. Introduction of higher polymer adhesive film.

Higher polymer adhesive film is used for the connection of aluminum skin and core LDPE

Typical application on the aluminum composite panel production is:

0.4mm Alu skin + 0.05mm Adhesive film+ 3mm LDPE + 0.05mm Adhesive film + 0.4mm Alu skin

5. Introduction of Coating.

The front surface of Aluminum Composite Panel is applied with a fluorocarbon resin(content of KYNAR 500 greater than 70% coating through the process of "REVERSE ROLLER COATING".

The reverse side of the cladding panel can be in mill finish or primer coated for protectio.

6. Technical Parameter of Aluminum Composite Panel

7. Techinical specification

7.1 Physical Characeristics

Item	Unit	3 mm	4 mm	6 mm	Remark
Specific Weight		1.52	1.38	1.23
Weight	Kg/m2	4.57	5.5	7.36
Heat expansion	*10 -6/°C(-20 °C -60°C)	24	24	24	ASTM D696
Heat conduction rate (apparent)	Kcal/.h. °C /kcal	0.43	0.39	0.35	ASTM C976
Thermal endurance (apparent)	m2 .h. °C /kcal	0.19	0.19	0.2	ASTM C976
Heat distortion temperature	°C	116	115	115	ASTM D648

7.2 Mechanical Characeristics.

Item	Unit	3 mm	4 mm	6 mm	Remark
Tensile Strength	Kg/m2	6.2	4.9	3.5	ASTM E-8
Bending strength	Kg/m2	5.9	4.5	3.1	ASTM E-8
Prolongation	%	12	14	17	ASTM E-8
Impact Shear resistance maximum load	*10(5)kg.mm2	7.3	14	35.4	ASTM C393 (20cm span)
Bending elastic modulus	kg	1380	1650	2100	ASTM D-732 (dia. 50mm)
Shear Strength	Kg/mm2	2.9	2.6	2.2	ASTM D-732 (dia. 50mm)