Shunan rapid set skim coat for EIFS - SA823

- Excellent bonding to the base concrete/render, - Scratch resistant, - Reduction in cracking, - Super smooth,super white finish - details see: https://www.buildingsupplieshub.com/shunan-rapid-set-skim-coat-for-eifs-10082809
Place of Origin: Shanghai China (Mainland)Brand Name: ShunanModel Number: SA823Usage: Plastering Mortar,Building coating
Type: Cement MortarColor: WhiteQuality System Standard: ISO 9001-2008Main Raw Material: Cement , Sand , Additives
Shunan rapid set skim coat for EIFS
contact supplier for Shunan rapid set skim coat for EIFS


SHUNAN skim coat plaster

SA825is specially developed as a finish coat to cover unevenness and pinholes in plastered surfaces and to make the walls/ceilings ready for painting. As it is white, it can be treated as a base coat for painting. It contains finest quality minerals, white cement and polymers.

What is a skim coat? A skim coat is a thin layer of cementitious plaster which is "skimmed" e.g., applied very thinly onto the exterior and interior of plastered and concrete surfaces.

BENEFITS

- Reduced paint consumption

- Primer not required

- Saves time

- Cost effective

- Avoids peeling of paint

FEATURES

- Excellent bonding to the base plaster / concrete

- Scratch resistant

- UV resistant

- Water resistant

- Reduction in cracking

- Can be used on new as well as old walls / ceilings

ADVANTAGES

- Excellent workability

- Can be applied directly on RCC surface

- Ease of use at site,just mix it with water

- Consistent work quality

- Excellent, super smooth,super white finish

- Good application ability, easy to apply and polish

- High adhesive strength

Field of application

· Suitable substrates: cement mortar, concrete

· Interior for building

Consumption:

1~2 kg/m2

Mix ratio with water

1 kg/0.33 lt

Limits of use

· Not suitable to use on oil substrate

· Not suitable to shrinkable substrate

Tools:

Elec-mixer,Bucket,Trowel

Product specification

Items

STANDARD

The state in container

no agglomeration,mixed homogeneously

Constructability

scrubing without barrier

Set time(surface set)/(h)

<5

Grinding ability %

20~80

Water-resistant ability48 h

No change

Alkali-resistant ability24 h

No change

Adhesive strengthstandard

≥0.50N/mm2

soaking

≥0.30 N/mm2

Stability of low temperature storage

-5°C,no change after 4h freezing ,no difficulties in scrubing

Testing condition:temperature 23°c±2°c;relative humidity 45%~75%

Application

- Put 8.25 liters clean water in a bucket. Gradually add one bag (25 kg) of powder into water

- Mix properly until homogeneous and lump-free

- Leave the product for 5~10 minutes. Then mix the second time for 1~2 minutes

- Apply the 1st coat of product onto the substrate. When the finish is dry, apply the 2nd coat. Each thickness is about 0.5~0.6 mm

- Ensure a flat, smooth and pinhole free coating

- Normally, after 24 hours (depend on weather and substrate), polish the surface

After that, apply the finish coating

Packaging Detail:In 25 kg paper bags, 80pcs/pallet
Delivery Detail:3 days

Related Product for Shunan rapid set skim coat for EIFS