Shunan Flexible Water-resistant Wall Plaster - SA823

Shunan White Cement Flexible Wall Coating Plaster(exterior)

Shunan. puttflex is a onecomponent, preblended,

cementitious outdoor wall plaster which, when mixed with water, is used prior to the application of finish coating. Durable fillers,fill cracks and splits on exterior surfaces

The cement based flexible exterior wall putty manufactured by us by using quality material. It is white cement based putty for cement plastering wall and ceilings and used to fill the uneven surface of cement plastering wall and concrete walls. It can be applied on freshly plastered wall thus resulting in saving time and cost.

Product information

Packaging

· Weight: 25 kg

· Color: white

· Consumption: 1.5 ~2kg/m2

· Shelf life & storage: one year after manufacturing date in dry ventilated place

Features:

- Suitable to exterior surface

- Resistance of Fungus and Algae

- Excellent crack converting capacity

- Its water based nature ensure safe and easy application

- Has better adhesion and durability

- No need to apply any kind of primer on it before application of paint/distemper

Product advantages

1) Easy to use,just mix it with water

2) Suitable to apply on shrinkable substrate

3) Good flexibility

4) Good application ability

5) Good water-resistant, damp-proof and water vapour transmission ability

6) High adhesive strength

7) Excellent weather resistance

8) Good match with substrate and finish coating

9) ISO9001 quaity management system

10) Green building material certificate

Test of flexibility

Field of application

1)Suitable to level on the shrinkable substrates: such as ETICS, wood board, gypsum board

2)Interior and exterior for building

Limits of use

· Not suitable to use on oil substrate

Consumption

1.5 ~2 kg/m2

Water addition

0.33l/ kg powder

Product specification

Application properties

Application temperature: 5°C~35°C

Pot life: 4hour

Water addition per 25kg bag: 8.5 liters

Tools:

Elec-mixer,Bucket,Trowel

Substrate requirement

The substrate should be sound, dry, flat, clean and durable

Substrate preparation

· Clean the substrate until free from dust, oil, or any other stains

· When high temperature season or dry substrate, substrate should be wet one day before

Application

· Put 8.5 liters clean water in a bucket. Gradually add one bag (25 kg) of powder into water

· Mix properly until homogeneous and lump-free

· Leave the product for 5~10 minutes. Then mix the second time for 1~2 minutes

· Apply the 1st coat of product onto the substrate. When the finish is dry, apply the 2nd coat. Each thickness is about 0.5~0.6 mm

· Ensure a flat, smooth and pinhole free coating

· Normally, after 6 hours (depend on weather and substrate), polish the surface

· After that, apply the finish coating

Application environment

· Temperature: 5°C~35°C

· Avoid rain, high temperature and frost

· Avoid direct sunlight or strong wind

Safety

· May cause serious damage to eyes

· May be sensitive to skin in case of contact. lrritable for eyes, respiratory system and skin

· Keep out of the reach of children

· Avoid breathing the dust

· In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor

· Wear suitable protective clothing,gloves and eye/face protection

Flexible Wall Putty Can be Used for EIFS With Rendering

e.g. SHUNAN'S EXTERNAL INSULATION SYSTEM BUILD UP

1. Concrete

2. Polystyrene board Adhesive(SA801)

3. Polystyrene foam insulation

4. Rendering coat mortar (SA802)

5. Fiberglass mesh

6. Rendering coat mortar (SA802)

7.Flexible external wall finish putty (SA823)

8. Coating