Shunan Cementitious Outdoor Thin Wall Plaster - SA824

Shunan. external wall plaster

One component, polymer-mineral, preblended, cementitious outdoor wall plaster which,

when mixed with water,is used prior to the application of finish coating.Durable fillers,fill cracks and splits on exterior surfaces.

Product information

Packaging

· Weight: 25 kg

· Color: white

· Consumption: 1~2 kg/m2

· Shelf life & storage: 6 months after manufacturing date in dry ventilated place

· National Standard: JG/T157-2009

Product advantages

· Easy to use, just mix it with water

· Excellent weather resistance

· Good application ability, easy to apply and polish

· Good water-resistant and water vapour transmission ability

· High adhesive strength

· Good match with substrate and finish coating

· ISO9001 quality management system

· Green building material certificate

Field of application

· Suitable substrates: cement mortar, concrete

· Exterior for building

Range of application:

Limits of use

· Not suitable to use on oil substrate

· Not suitable to shrinkable substrate

Consumption

1~2 kg/m²

Water addition:

Mix 2.6 parts powder to 1 part water in a clean container, this should be toothpaste consistency.

Product specification

Elec-mixer, Bucket, Trowel

Substrate requirement

The substrate should be sound, dry, flat, clean and durable

Substrate preparation

· Clean the substrate until free from dust, oil, or any other stains

· When high temperature season or dry substrate, substrate should be wet one day before

Application

· Put 8.25 liters clean water in a bucket. Gradually add one bag (25 kg) of powder into water

· Mix properly until homogeneous and lump-free

· Leave the product for 5~10 minutes. Then mix the second time for 1~2 minutes

· Apply the 1st coat of product onto the substrate. When the finish is dry, apply the 2nd coat. Each thickness is about 0.5 ~0.6 mm

Ensure a flat, smooth and pinhole free coating

· Normally, after 24 hours (depend on weather and substrate), polish the surface

After that, apply the finish coating

Application environment

· Temperature: 5°C~35°C

· Avoid rain, high temperature and frost

· Avoid direct sunlight or strong wind

Safety

· May cause serious damage to eyes

· May be sensitive to skin in case of contact. lrritable for eyes, respiratory system and skin

· Keep out of the reach of children

· Avoid breathing the dust

· In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor

· Wear suitable protective clothing,gloves and eye/face protection