shoring prop - xg

Shandong Xingang International Formwork Co.,ltd have developed the system of formwork products with international standard.such as timber beam and plywood,slab formwork system,wall formwork system,column formwork system,120 universal panel formwork system,Hydraulic climbing system,Cantilever formwork system,single formwork system,alluminium alloy formwork system,props and shorings system,hands form and so on.

SHORING PROP AND SCAFFOLDING

Adjust Area

0.50m-0.80m

0.60m-1.00m

0.70m-1.20m

1.00m-1.80m

1.60m-2.90m

2.00m-3.50m

2.00m-4.00m

2.50m-4.50m

3.50m-5.50m

DIA:48mm/40mm,56mm/48mm,60mm/48mm,76mm/63.5mm,89mm/76mm

Light Duty Props

Heavy Duty Props

Frame system

Scaffolding Tower

Table formwork

Table formwork is a kind of formwork specializing in floor concreting,can be equipped and bulk.The table formwork has simple structure,it is easy to assemble and disassemble and can be reusable.

Timber Beam and plywood

Timber Beams are used as formwork beam.The size is 200mm high and 80mm wide.There are different lengths in order to select the most suitable for each application.

Hardwood plywood is coated with 40/120g/m2 phenolic resin on both sides.

Column Formwork

Adjustable column formwork is a formwork for square or rectangle,which is designed for variational dinension in give range.Its adjustable ability comes true by the change of vertical waling's relative position.

Wall Formwork

Wall formwork for housing construction in the wall pouring,the extensive use of templates to greatly accelerate the construction schedule and shorten the construction period,reducing the cost of the project,and construction of convenience.

ADJUSTABLE CIRCLE WALL FORMWORK

Hydraulic Automatic Climbing Formwork

Hydraulic Automatic Climbing Formwork includes the oil cylinder and investing box.The inverting box can control the climbing of the steel rail of the bracket.The steel rail and the bracket can inter-climbing,so the whole system will climb up steadily.Cranes are not needed during the climbing.It’s easy to operate,highly active and safe.It’s best choice for the construction of high building and towers.

Auto-Climbing Protection Panel

Auto-climbing protection panel is enclosure for construction of high-rise buildings.It can enclose three floors one time.Through the enclosure,the slab edges on the upper floors are completely enclosed,a covered working area is formed which provides protection from wind and bad weather,Site personnel are secure against falling at all times,work productivity will be raised significantly due to the increased safely feeling.

Cantilever Climbing Formwork

The Cantilever climbing formwork is mainly used in the concrete pouring of dam,bridges,tunnel,underground workshop,power station and so on.Because the concrete lateral pressure is entirely supported by anchor system and the wall-through tie-rod,additional reinforcement is not needed..The construction is easy,rapid and economical,the concrete height of one pouring is high,and the surface of the concrete is slick.