shear connector for stud welding iso 13918 - M3-M64

shear connector iso 13918, 1.CE, 2.More than ten years of industry experience,, 3. - details see: https://www.buildingsupplieshub.com/shear-connector-for-stud-welding-iso-13918-10086776

Place of Origin: Zhejiang China (Mainland)	Brand Name: HYZ	Model Number: M3-M64	Material: SWRCH15A,ML15AL,ML15
Standard: ISO 13918; AWS D1.1,ASTM A108	Use: Apply to railway and highway bridge,high-rise civil building,etc	Material:: Low Carbon Steel	Type:: Shear Connector
Tensile strength: ≥ 450N/mm2	Use:: Mainly in steel structure, railway, road, bridge, etc.	Surface Treatment:: dichromate, galvanization, black, plain

shear connector for stud welding iso 13918

contact supplier for shear connector for stud welding iso 13918

shear connector ,weld stud,weld pin,weld screw
Chemical Component Of Material (%)
	C	Si	Mn	P	S	Al
Material	C	Si	Mn	P	S	Al
ML15AI	0.13-0.18	≤0.10	0.30-0.60	≤0.035	≤0.035	≥0.020

Mechanical Properties
Country	Tensile strength_bN/mm²	Yield point_BS/mm²	Elongation percentage δ%	Contraction percentage Ψ%
CHINA	≥400			-
GB/T10433	≥400	≥320	δ₅≥14	-
USA				≥50
ANSI/AWSD1.1	≥415	≥345	δ₄≥20

JAPAN	402-549	≥235		-
JIS B 1198	402-549	≥235	δ_3.54≥20	-
BS EN				-
ISO13918:2008	≥450	≥350	≥15

Also we can make ceramic ferrule according to your requirement

Shear studs(bolt/stud/welded stud)

Round-ended nail used in arc stud welding (shear studs)

STUD DIMENSIONS
d	nominal	10	13	16	19	22	25
	min	9.64	12.57	15.57	18.48	21.48	24.48
	max	10	13	16	19	22	25
d_K	min	17.65	21.58	28.58	31.5	34.5	39.5
d_K	max	18.35	22.42	29.42	32.5	35.5	40.5
K	min	6.55	7.55	7.55	9.55	9.55	11.45
K	max	7.45	8.45	8.45	10.45	10.45	12.55
WA ref.		4	5	5	6	6	6
L₁		40-180	40-200	50-250	60-300	80-300	80-300

CHEMICAL COMPONSITIONS OF MATERIAL(%)
Material	C	Si	Mn	P	S	Al
ML15AI	0.13-0.18	≤0.10	0.30-0.60	≤0.035	≤0.035	≥0.020

MECHANICAL PROPERTIES
Country	Tensile strenghth _bN/mm²	Yield point _BS/mm²	Elongation percentage δ%	Contraction percentage Ψ%
CHINA GB/T10433	≥400	≥320	δ₅≥14
USA ANSI/AW Sd1.1	≥415	≥345	δ₄≥20	≥50
JAPAN JIS B 1198	402-549	≥235	δ_3.54≥20

MECHANICAL PROPERTIES
Country	Test item	STUD SIZE
Country	Test item	10	13	16	19	22	25
CHINA GB/T10433	Tensile load N	When the hammer hit the nail and the nail bend	55860	84420	119280	159600	206220
	Tensile load N
	Bend test	When the hammer hit the nail and the nail bend 30°, there is no crack which can be see by eye in the area of weld bead and heat-affected zone
USA ANSI/AW Sd1.1	Tensile load N		≥55100	≥83500	≥118000	≥158000
	Tensile load N	The crack is not on the weld bead.
	Bend test	Put the nail into the test set, and bend alternately the nail 30°in forward and negative direction (or bend the nail 90°), the crack is not on the weld.
JAPAN JIS B 1198	Tensile load N		52960-72570	80410-110800	113800-155900	153000-208900
	Tensile load N
	Bend test	When the hammer hit the nail, the nail bend less than 30°, there is no crack on the shank of nail and the welding part.

shear connector iso 13918

MATERIAL

MILD STEEL

AISI C1015, C1018 or C1020

MECHANICAL PROPERTIES

Tensile	..........	60,000 psi (min.)
Yield	..........	50,000 psi (min.)
Elongation	..........	20% (min.)
Area	..........	50% (min.)

Values for various grades available upon request.

Organization

ERP System

Advanced imported testing equipments are used for strict inspection of raw materials,semi-finished and finished products to ensure that each batch meets the quality standard

Furnace batch number tracking is implemented during the whole production process

Product testing data ia put into ERP system,employes self-inspection during the production process and inspector re-inspection are implemented

Inspector re-inspection is needed besides the initial inspection when production starts,mode updates or material changes;"cup"testing method is applied

During the production process,produts can go to the next procedure only after the confirmation and stamp by corresponding inspectors

All the data during product testing will be put into ERP system

Equipment:

Major manufacturing equipments consist of Z47-24 multi-station auto cold forger, double-strike cold forger, intermediate frequency induction furnace, stress machine, stamp, specific cutting machine, thread rolling machine, tapping machine, mesh belt heater, middle or high temperature salt immerse furnace, saltpeter tempering furnace, blacken, phosphoration and saponification. The credible inspection instruments consist of steel chemical elements analyzer, metallurgical microscope, steel type analyzer, bolts non-destructive inspection instruments, magnetic particle inspection machine, tension inspection machine, impact testing machine, axis force tester, and sclerometer etc..

Project as follows:

Packaging Detail:Packaging for shear stud connectors can be your choice.Welding studs can be put into cartoon boxes on palettes or in steel drums.

Delivery Detail:5-15days