self adhesive fiberglass drywall joint mesh tape - XH-001

Fiberglass tape is mainly used for patching drywall, gypsum board joints, cracks in walls and other walls fracture.It has many advantages as following:
1.Excellent alkali resistance, shelf life of 20 years;
2.high tensile strength, resistance to deformation and anti- crack.
3.The fracture caused by an earthquake will not be bad and will be non-foaming.
4.Good self-adhesive, no pre-primer on, simple construction and saving manpower.

5.The quality of products is stable through the seasons.
6.Softness and color can be made according to customers requirement.

How to use:
1. Wall must be clean and dry.
2. Center and apply tape over the length of the joint and pressing firmly.
3. Apply a generous first coat of compound over the tape and through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape.
4. Let dry completely, then sand slightly.
5. Apply sufficient thin finishing coats to produce a smooth wall surface.
6. Cut of butted boards do not have a tapered edge. Therefore, special care must be taken to assure proper compound penetration of all joints. This may result in slight build-up of compound that will require an increased amount of edge feathering.