self-adhesive bitumen waterproofing membrane for any specification(1mm-2mm) - waterproofing membrane

1,Could be used on concrete, stick and steel., 2,Hot-resistance, 3,Guarantee for 15 years, 4. No need torch, applying is easy. - details see: https://www.buildingsupplieshub.com/self-adhesive-bitumen-waterproofing-membrane-for-any-specification-1mm-2mm-10100439

Type: Waterproof Membrane,waterproofing membrane	Place of Origin: Shandong China (Mainland)	Brand Name: flashing tape	Model Number: waterproofing membrane
Thickness: 1mm to 2mm	Elongation: 450%	Width: from 50mm to 1m	Length: 1m to 50m

self-adhesive bitumen waterproofing membrane for any specification(1mm-2mm)

contact supplier for self-adhesive bitumen waterproofing membrane for any specification(1mm-2mm)

Our company adopt the German technology, and the most advanced international formulations suitable for the manufacture of light steel structure waterproof anti-corrosion materials, low cost, higher than the life of the steel structure itself 1-2 times, environmental materials to fill gaps in the domestic steel structure waterproofing !

Product description:

The product is a kind of polymer modified asphalt materials, using polyester carpet or glass mat for the matrix, the surface covered with polyethylene film, aluminum foil or fine sand, the base covered with a release sheet,keep the self-adhesive flexible waterproof. The product has a good self-adhesive and bending properties.

Application:

Construction is simple, clean, and can be widely used in roofing, basement, bathroom, etc. waterproofing works, and for legislation to pave and stick and pipe wall (except heat pipes), bridges , and other complex environment, especially in open flame is prohibited, covert fire waterproofing works.

The detailed information:

thickness: 1mm,1.2mm, 1.5mm, 2.0mm, 2.5mm, 3mm, 4mm.

reinforcement:polyester, fiberglass

width: 1m or any width within 1m.

length: 2.5m, 5m, 10m, 15m, 20m.

Low-temperature-resistant properties of the product, and the MTR, tunnels and the scene of the fire with the best waterproof, moisture resistance and sealing materials, also apply to pipeline waterproof, anti-corrosion works.

The product meets the industry standard JC 840-1999 “self-adhesive plastic bitumen waterproofing membrane”. The requirements to main physical properties are listed in table 2.

[Physical

Thickness(mm)	width(mm)	Area(m2)
1.2	1000	20
1.5		20
2.0		15

Property

]

The product meets the industry standard JC 840-1999 “self-adhesive plastic bitumen waterproofing membrane”. The requirements to main physical properties are listed in table 2.

Table 2 physical properties

No.
1			PE	AL	N
2	Water impermeability	Pressure,MPa ≥	0.2	0.2	0.1
		Retention time,min ≥	120,water impermeable
3	Heat resistance°C		-----	80 No slippage, flowing, dropping.	--
4	Tensile force N/50mm ≥		130	200
5	Elongation at break,% ≥		450	200	450
6	Softness		-20°C,Φ20mm,3s,180°C. No crack.		--
7	Shear performance N/mm	Between membranes ≥	2.0 or fracture on the external agglutination section		fracture on the external agglutination section
		Between membrane and aluminum plate ≥
8	Peel strength,N/mm ≥		1.5 or fracture on the external agglutination section		fracture on the external agglutination section
9	Puncture resistance			water impermeable
10	Aging by artificial climate	Appearance		No crack, no bubble.	---
		Tensile force retention percentage,%		80	---
		Softness at low temperature,°C		-10°C,Φ20mm,3s,180°C, No crack.	---

Product Features:

Self-adhesive modified bitumen membrane with a self-adhesive surface of the waterproofing, sealing material, divided into with base membrane and without base membrane.And one side with self-adhesive layer and two sides with layers two kinds.The self-adhesive layer has covered with release sheept. the material of realease sheet also has a few kinds. all the self-adhesive layers no need glue, just because the adhesive of itself, which is acaused by the modified bitumen. Low-temperature-resistant properties of the product, and the MTR, tunnels and the scene of the fire with the best waterproof, moisture resistance and sealing materials, also apply to pipeline waterproof, anti-corrosion works.

Packaging Detail:plastic bag and then with pallet or loose packing

Delivery Detail:15 days after get receipt waterproofing membrane