SBS modified underground asphalt waterproof membrane - SBS APP

SBS modified underground asphalt waterproof membrane, 1. good quality of anti-aging,acid,alkali, 2. high tensile strength - details see: https://www.buildingsupplieshub.com/sbs-modified-underground-asphalt-waterproof-membrane-10101420
Type: Roofing FeltPlace of Origin: Hebei China (Mainland)Brand Name: JIAN DAModel Number: SBS APP
color: blackUsage: waterproof materialMaterial: SBS modified asphalt,polyester matsize: 1m*10m 1m*8m
original place: HEIBEI,cangzhou(mainland)tightness: 0.3Mpa,keep time 30min  
SBS modified underground asphalt waterproof membrane
contact supplier for SBS modified underground asphalt waterproof membrane


SBS modified underground asphalt waterproof membrane

specification

Width--1000mm.

Thickness:3mm, 4mm, 5mm

Length: 10m, 7.5/10m, 8m

Table 1

substrate

upper surface materials

Polyester fiber(PY)Glass fiber

(G)

PE filmPY- PEG - PE
Fine sandPY- SG - S
Mineral granulesPY- MG - M

Physical and Mechanical Properties

Standard value of GB18243-2000- see Table 2.

Table 2

No.

Substrates

PY

G

Types

AAAAAA

1

Content of soluble substances g/ m2

≥

3mm

2100

1300

4mm

2900

5mm

3500

2

Water impermeability

pressure, MPa ≥

0.3

0.20.3

retention time, min≥

30

3

Heat resistance degree, °C

9010590105

No slipping, flowing or dropping

4

Tensile strength, N/50mm ≥

Longitudinal

450

800

350500

Transverse

250300

5

Elongation at break % ≥

Longitudinal

30

40

—

Transverse

6

Flexibility at low temperatures, °C

-20-25-20-25

No cracks

7

Tearing strength, N≥

Longitudinal

250

350

250350

Transverse

170200

8

Accelerated weather test

Appearance

Grade 1

No slipping, flowing or dropping

Strength retention% ≥Longitudinal

80

Flexibility at low temperatures, °C

-15-20-15-20

No cracks

Product Characteristics

Good capacity of anti-aging, anti-acid, and anti-alkali, its service life is 30years.

High tensile strength and elongation which adapts to the contraction or crack of the base.

Good perdurable capacity to climate; be used in cold(-25°C)environment for long life.

Applied by torch.

Widely applied in roofing, basement, pool, subway etc.

Construction Requirements Basement Treatment

The waterproofing base should be strong smooth, and clean without particles on the surface.

No peeling or cracking shall exist on the surface. The corners of the base shall be made into arcs with

a radius of no less than 20mm or triangular. The drain slope, division seam, and air vent shall be carried

out and treated according to design requirements. Then brush promer on the foundation until it is dry.

Installation

Place the sheet correctly, fire torch, evenly heat the sheet and foundation ,When the surface of the sheet is

black and bright with a fusion layer apply the sheet and press it into a solid and flat state. Before the sheet

is cool, seal the edge of joints by float.

Cautions installation is forbidden during rain, snow, fog, strong wind.

The temperature should be 5-35°C during installation.

All nodes should be reinforced during installation.

Keep away from fire during storage.

If you want to know more about our products,here welcome any time!

Packaging Detail:packed in roll with pallet
Delivery Detail:within 10 days after receipt 30% deposit in advance or L/C

Related Product for SBS modified underground asphalt waterproof membrane