SBS/APP modified bitumen waterproof membrane/waterproofing material/waterproofing coating - ZONZI-WM

SBS/APP modified bitumen waterproof membrane/waterproofing material/waterproofing coating

SBS modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as styrene butadiene-SBS), reinforced with polyester or fiberglass, finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane etc.

Characteristic

a)Good impermeability

b)Possess good tensile strength, elongation rate and size stability which could be well suited the substrate distortion and crack.

c)SBS modified bitumen membrane is specially being applied in the cold area with low temperature , d)Good performance in anti-puncture, anti-broker, anti-resistance, anti-erosion, anti-mildew, anti-weathering

Applicable scope

Suitable for civil building roofing, underground, bridge, parking, pool, tunnel in the line of waterproofing and dampproof, especially for the building under high temperature. According the roofing engineering stipulation, APP modified bitumen membrane could be used in the Grade I civil building and industrial building which has special waterproofing requirement

1. Introduction

SBS(Styrene Butadiene Styrene) /APP(Atactic Polypropylene) modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as SBS, APP, APAO, APO), reinforced with polyester or fiberglass, finishing the upward face with polythene membrane, fine sands or mineral slates (or grains) or etc.

2. Specification

3. Applications

1). Roof and underground in industrial and civil buildings;

2). Bridge, subway, tunnel, swimming pool, etc.

3). Waste landfill, sewage plant, irrigation system, etc.

4. Pictures for your reference