SA811 Caulking Agent for Tile - SA811

Shunan. TileCaulking AgentSA811

Grout between the tiles that have been laid. It helps keep the tiles from excessive movement and stops water from getting behind the tiles. Most grout is cement based and can come in a large range of colours.

Shunan. sanded grout is used for floor as it is more suited to high foot traffic. Smooth grout (grout without sand) is used for walls and low foot traffic floors.

Sanded Grout is formulated from a blend of high strength portland cement, graded aggregates, polymers and color-fast pigments and provides a grout joint that is dense, hard and durable. For grout joint widths of 1/16" (1.5 mm) up to 3/8" (9 mm).

product information

Packaging

Weight: 25kg

Color: multi color

Standard: JC/T 1004-2006

Shelf life: 6 months from production date

Field of application

1)grout for tile joints from 1mm to 10mm wide on wall and floor

2)Suitable for grouting ceramic tiles, marble, stones etc

consumption

2-4 kg/m2

Consumption =(A+B)*C*D*1.5/(A*B)

A- length of tile mm

B- width of tile mm

C- thickness of tile mm

D- joint width mm

PS: This formula does not include application wastage

Application properties

Joints width: 1.5~9mm (with sand)

Application temperature: +5°C to +35°C

Pot life : 2 hours

Water addition: 0.23 liter/ kg powder

Setting time : 24 hours

Tools

Rubber trowel,Trowel, Sponge, Bucket

Substrate requirement

The substrate should be hard, sound, dry, flat, clean and durable

Substrate preparation

· Ensure 24 hours of time interval after tiling

Before grouting, make sure that the tiles joints are clean without water

Safety

· May cause serious damage to eyes

· May be sensitive to skin in case of contact. lrritable for eyes, respiratory system and skin

· Keep out of the reach of children

· Avoid breathing the dust

· In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor

· Wear suitable protective clothing,gloves and eye / face protection

Production Specification: