SA Wall Grout and Glue For Backsplash Tiles - SA814

SA GLUE FOR BACKSPLASH TILES /GLASS TILE MORTAR

PRODUCT NO..SA814

PRODUCT DESCRIPTION

SA Glass Tile Mortar is a white Portland cement based mortar suitable for glass-tile masonry construction

PRODUCT USE

SA Glass Tile Mortar is used for laying glass tile for both interior and exterior walls. It can also be used for tuckpointing, stucco, or other decorative applications where white mortar would be appropriate.

SIZES

• SA Glass Tile Mortar - 88 lb (40 kg) bags

COVERAGE

6 - 8 kg/m2

TECHNICAL DATA

SA Glass Tile Mortar exceeds GB24264-2009 property requirements for Type S Mortar achieving a compressive strength in excess of 1,800 psi (12.4 MPa) at 28 days.

INSTALLATION

SURFACE PREPARATION

Glass block must also be properly cleaned for best bond. Follow the instructions of the glass block manufacturer for best cleaning method.

MIXING

Thoroughly mix SA Glass Tile Mortar with clean water to a stiff plastic like consistency. Use 10 L of water per 88 lb (40 kg) bag. Mix thoroughly for about 5 minutes. Stir material occasionally to keep mix workable; however, no additional water

should be added

CLEANING

Use a damp cloth to remove all excess mortar from the surface of

glass blocks before the mortar hardens. Polish off remaining mortar residue with a clean, dry, soft cloth.

CURING

Proper curing increases the strength and durability of concrete. curing should be started as soon as possible

PRECAUTIONS

Mix only with clean water. Under extreme weather coconditions, appropriate cold-weather and hot-weather precautions should be followed.

WARRANTY

Shunan Companies warrant this product to be of merchantable quality when used or applied in accordance with the instructions herein.