SA polymer-mineral adhesive mixture for bonding Thermal Insulation Material and reinforcement net - SA802

1)Ensures perfect adherence to thermal insulation panels, 2)Resistant to thermal shocks, 3)Easy to apply&forms smooth substrates - details see: https://www.buildingsupplieshub.com/sa-polymer-mineral-adhesive-mixture-for-bonding-thermal-insulation-material-and-reinforcement-net-10082854
Place of Origin: Shanghai China (Mainland)Brand Name: SAModel Number: SA802Usage: Joint Mortar
Type: Cement MortarMain Raw Material: Cement and additives, Sand, PolymersApplication: ETICS BasecoatQuality Management System: ISO9001: 2008
SA polymer-mineral adhesive mixture for bonding Thermal Insulation Material and reinforcement net
contact supplier for SA polymer-mineral adhesive mixture for bonding Thermal Insulation Material and reinforcement net


SA802 Adhesive and Basecoat For Foamed Polystryrene Boards and Making Reinforced Layer In External Thermal Insulation Composite System

PRODUCT INFORMATION

PRODUCT PACKAGING

·Weight: 25kg

· Color: grey

· Consumption: 5~6 kg/m2

· Shelf life and storage: 6 months after manufacturing date in dry ventilated place

· Standard: JG149-2003

Water addition:
0.22 liter/ kg powder (5.5 L of Water for 25 kg of mortar)

Field of application:

The function of this product is to protect the EPS board and fix the mesh. The finishing coat can be tile, plaster, paint etc.

Remarks:

1) Only mix with water, no other addition

2) The temperature of air and glue must be from 5°C~35°C

3) The glue must be used up in 2h

4) Avoid sunshine, high temperature and freezing

5) Avoid strong wind during application

6) Avoid rain during application

Consumption

Typically, one 25kg bag will cover 4-5 square meters (4.5 ~ 6 kg/m2)

Technical Data

Pull-off adhesive strength

(with foamed polystyrene)

≥ 0.10 N/mm2

(polystyrene board damaged)

Water resistant pull-off adhesive strength

(with foamed polystyrene)

≥ 0.10 N/mm2

(polystyrene board damaged)

Pot life

Pull-off adhesive strength

(with foamed polystyrene)

1.5 ~ 4.0h

≥ 0.10 N/mm2

(polystyrene board damaged)

Compressive /flexural strength %≤ 3.0

Tools

electric-mixer,trowel,bucket

Substrate requirement

1) Polystyrene board must be clean (no dust or dirt)

2) Polystyrene board must be fixed stably (Wait min 24h before applying shunan. therm epsad)

3)The surface of the whole polystyrene board wall must be level
Preparation
· Polystyrene board must be fixed stably

· Polish the EPS board to make sure the whole polystyrene wall is flat

Application enviroment

1) Temperature:5°C~35°C

2) Avoid raining, high temperature and frost

3) Avoid direct sunlight and class 5 wind

Safety
1)May cause serious damage to eyes
2) May be sensitive to skin in case of contact. lrritable for eyes, respiratory system and skin
3) Keep out of the reach of children
4) Avoid breathing the dust
5) In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor
6) Wear suitable protective clothing,gloves and eye/face protection

SA802 is a part of external wall insulation systems of external building walls

Typical ETICS Configuration

1. Concrete or Masonry Substrate

2. Adhesive Applied to Insulation Board (SA801)

3. Insulation Board

4. Base Coat

5. Reinforcing Mesh
Embedded in Base Coat
6. Mechanical Fasteners

7. Base Coat

8. Flexible Tile Adhesive

9. External Wall Tiles

10. Flexible Tile Grout

Packaging Detail:Packed in 25kg plastic lined paper sacks
Delivery Detail:5 days

Related Product for SA polymer-mineral adhesive mixture for bonding Thermal Insulation Material and reinforcement net