SA Polymer Based Decorative EPS Foam Coating - SA802

· Excellent Adhesive for EPS Foam Shapes to: EPS Foam, wood, masonry, cement backer board,

poured in place concrete

·Goes on Smooth and Easy

·Rock Hard Coating & Adhesive

· 50 pound bags and can be purchased by the bag, pallet or truckload.

· Tintable with Dry or Liquid Pigments

· Excellent to Hard Coat Props, Theatrical Sets, EPS Foam Shape, EIFS Arhitectural Pieces

· Sets Hard Like Concrete

Shelf life and storage: 6 months after manufacturing date in dry ventilated place

Standard: JG149-2003

Benefits of SA Coats:

· Fast set times, fast cycle times, short cure times.

· Superior hardness and easy to apply.

· Water resistant and chemically inert once cured.

· Safe for humans and animals.

· Tough, stable surface coating for decorative building items, artificial landscapes, stage props, sculptures, etc.

· Structural foam that’s light weight, reducing the need for structural support.

Remarks:

1)Only mix with water, no other addition

2)The mixture must be used up in 2h

3)Avoid rain during application

Consumption

4.5~6 kg/m²

Mix ratio with water

5.5 liter/ 25 kg powder, 0.22 l/ kg powder

Substrate requirement

2)May be sensitive to skin in case of contact. lrritable for eyes, respiratory system and skin

3)Keep out of the reach of children

4)Avoid breathing the dust

5)In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor