SA Glue For Floor and Wall Porcelain Tiles - SA812

tile set, 1)Non Slip, 2)Highly water resistant & frost resistant, 3)Suitable for glass or porcelain tiles any porosity tile - details see: https://www.buildingsupplieshub.com/sa-glue-for-floor-and-wall-porcelain-tiles-10082902
Place of Origin: Shanghai China (Mainland)Brand Name: SAModel Number: SA812Usage: Joint Mortar
Type: Cement MortarMaterial: Cement, sand, additivesQuality Management System: ISO9001:2008Colors: Grey/White
SA Glue For Floor and Wall Porcelain Tiles
contact supplier for SA Glue For Floor and Wall Porcelain Tiles


SA- High Quality & Cheap Porcelain Tile Glue Manufacturer

Tiles are installed with mortar, which is basically a type of cement spread on the back of the tile or on the surface you are tiling. After all the tiles are set into the mortar and leveled out, the mortar must harden for at least 24 hours.

This ceramic tile install mortar is great for wall tiling as it allows for the small amounts of house movement.

This is supplies dry and is mixed with water to use and is an excellent choice for bathroom and kitchen walls

Product Information

· Weight: 25kg

· Standard: JG/T547-2005

· Shelf life: 6 - 8 months from production date

Field of Application

· Used to fix tiles with any water absorption tiles

· Tiles fixed on external wall suggested size is less than 120cm2

· Tiles fixed on wall suggested weight is less than 20kg/cm2

· Fix tiles on internal or external walls and floors

Coverage(Approximate)

6mm notched trowel - 5 m2/ 25kg bag

10mm notched trowel - 3.0m2/ 25kg bag

TECHNICAL DATA

Mix ratio with water25kg / 5.75l
Pot lifeMin 3 hours
Open time20 minutes
Grouting after24 hours
Full Service48 hours
FlexibilityPoor
Temperature Resistance0°C-60°C
AgeingExcellent
Resistance to DampGood
Tensile Adhesive Strength (28 days)( JC/T547-2005)>0.5 N/mm2

Items

Data(MPa)

Pull-off bonding strength≥0.5
Pull-off bonding strength after soaking≥0.5
Pull-off bonding strength after heat aging≥0.5
Open time,20 min pull-off bonding strength≥0.5
Pull-off bonding strength after cycles

of freezing and thawing

≥0.5

Tools

Rubber hammer,Trowel,Elec-mixer,Bucket

Substrate Preparation

1)Substrate should be flat ,hard, level, dry, and clean with normal absorption

2)Clean the surface until free of grease, dust or any stains

3)Old paint or plaster should be removed

4)Substrate been repaired should be preserved at least 48 hours

Packaging Detail:Water proof bag, also available on request
Delivery Detail:3 days

Related Product for SA Glue For Floor and Wall Porcelain Tiles