SA Glass Block Mortar Mix White - SA810
Place of Origin: Shanghai China (Mainland) | Brand Name: Shunan | Model Number: SA810 | Usage: Masonry Mortar |
Type: Cement Mortar | Material: White sand, Portland cements and additives | Quality System Standard: ISO 9001:2008 | Color: White |
Shunan SA810 Glass Block Joint Mortar
A standard-setting non-slip,water-resistant and frost-resistanttile adhesive for low-porosity tiles and substrates
For fixing all types of ceramic tiles, including fully vitrified/porcelain tiles:
- To internal walls and floors
- To external walls and floors
- To low porosity substrates such as power floated concrete or existing tiles
Suitable for use on concrete/brick/block walling, cement:sand rendering, plaster, plasterboard, cement sheets, tile backer boards, concrete bases, cement:sand screeds, plywood overlay, ceramic/quarry tile/terrazzo/hard natural stone, vinyl tiles/sheet bases, mastic asphalt ,can be used in Showers and Swimming Pools
Product information
· Weight: 25 kg
· Color: White
· Standard: GB24264-2009
· Shelf life: 6-8 months from production date
· Storage: unopened bag on plate in dry place
· Production date & batch number: Find on outside of bag
Field of Application
· Used for fixing low porosity tiles (water absorption less than 6%) such as glass mosaic tiles, porcelain tiles, natural stone, etc
· Used for fixing tiles both on inside and outside walls and floors
· For tiles fixed on external walls higher than 3.5m, the size of the tiles is suggested to be less than 30×30cm
· Used for fixing tiles on rigid substrate
· Stone fixed on wall higher than 3.5m suggested being with mechanical anchor together
· Used for fixing tiles in dry and damp area
Applicable Place | Applicable Substrate | Applicable TileSpecifications |
Interior wall | Cement mortar, clay bricks, concrete, aerated concrete, aerated block | Thickness≤20 mm |
gypsum board, fiber cement board | Thickness≤20 mm | |
solid wood board, metal board | ≤50 x 50 mm mosaic | |
Old tiles | Thickness≤20 mm | |
Interior floor | Cement mortar, artesian ground floor, concrete | unlimited |
Old tiles | unlimited | |
Floor heating | unlimited | |
Solid wood board | ≤300 x 300 mm(needs interface treating) | |
Outside wall | Cement mortar, clay bricks, concrete | Thickness≤20 mm |
Old tiles | Thickness≤20 mm | |
Outside floor | Cement mortar, clay bricks, concrete | uniimited |
Old tiles | unlimited | |
Special use | Swimming pool | ≤300 x 300 mm |
External thermal insulation systems | ≤20 kg/m2 |
Consumption
Typically one 25 kg bag will cover 4 to 5 square metres, 5 -8 kg/m2)
Application properties
1)Application temperature: 5°C~35°C
2) Pot life: 3 hours
3)Open time: 20min
4)Water addition: 5.75 liter /25kg
5) Adjust time: 20 min
6)Slip resistance 20kg/m2no slip
Tools
Rubber hammer,Trowel,Elec-mixer,Bucket
Notched Trowel
TECHNICAL DATA
Mix ratio with water | 25kg / 5.75l |
Pot life | 3 hours |
Open time | 20 minutes |
Grouting after | 24 hours |
Full Service | 48 hours |
Temperature Resistance | -30°C - 100°C |
Ageing | Excellent |
Resistance to Damp | Excellent |
Tensile Adhesive Strength (28 days)( JG158-2004) | > 1 N/mm2 |
Substrate requirement
The substrate should be hard, sound, dry, flat, clean and durable
- Substrate should be flat ,hard, level, dry, and clean with normal absorption
- Clean the surface until free of grease, dust or any stains
- Old paint or plaster should be removed
- Substrate been repaired should be preserved at least 48 hours
Application Enviroment
- Ambient temperature: 5°C~35°C
- Avoid application if too hot or freezing weather
- Avoid application under direct sunlight and strong wind
Safety
- May cause serious damage to eyes
- May be sensitive to skin in case of contact.
- Keep out of the reach of children
- Avoid breathing the dust
- In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor
- Wear suitable protective clothing,gloves and eye/face protection
Packaging Detail:In 25 kg paper bags |
Delivery Detail:3 - 5 days |