SA Flexible Ceramic Tile Adhesive - SA816

cementitious 1)high strength, 2)built in flexibility, 3)water & frost resistant, 4)enhanced adhesion, 5)no additives required - details see: https://www.buildingsupplieshub.com/sa-flexible-ceramic-tile-adhesive-10082896
Place of Origin: Shanghai China (Mainland)Brand Name: SAModel Number: SA816Usage: Joint Mortar
Type: Cement MortarQuality System Standard: ISO 9001:2008Material: Cement basedNormative References: EN1348
SA Flexible Ceramic Tile Adhesive
contact supplier for SA Flexible Ceramic Tile Adhesive


SA816 Flexible Tile Adhesive

A standard setting, flexible,high strength grey cement based adhesive that allows grouting after 24 hours, and full traffic after 48 hours. the adhesive was designed for easy use,allowing a 3 hour pot life. for glue ceramic marble stone mosaic for wall & floor exterior interior especially for external insulation system. on balconies, terraces, façades and on wall or floor heating systems, glazed tiles, terracotta, clinker, gres tiles, china mosaic, cement and terrazzo tiles, and non-absorbent natural stone and stone agglomerate tiles.

It is one-component adhesive specially foumulated to allow for flexibility,water resistance and increased strength,usually only achieved by the addition of latex admixtures.only water needs to be added,reducing mixing errors on site.

product information

·Weight: 25kg

· Color: grey

· National Standard: JG158-2004

· OEM and ODM service offered

· Best before in months: 6 months from production date

· Storage: unopened bag on plate in dry place

· Production date & batch number: Find on outside of bag

Application

√ ceramic tiles

√ terracotta tiles

√ clay tiles,

√ large size tiles stones and artificial marble

Area

√ specially formulated to absorb vibration and deflection of substrates and can be used in the following areas:

√ Interior and exterior floors and walls

√ existing tiles wall surfaces,

√ suspended floor surfaces,

√ wet areas,

√ swimming pools,

√ railway stations,

√ Used for fixing coverings on deformable substrate, such as gypsum board, fiber cement board,insulation systemetc.

Properties

flexible with increased adhesion possibility of fixing tiles from top of the wall and prolonged open time,for floor and wall heating

Consumption

5 - 6.5 kg/m2

Applicable PlaceApplicable SubstrateApplicable Tile Specifications
Interior wallCement mortar,clay bricks, concrete, aerated concrete, aerated blockThickness≤20 mm
gypsum board, fiber cement boardThickness≤20 mm
solid wood board, metal board≤50 x 50 mm mosaic
Old tilesThickness≤20 mm
Interior floorCement mortar, artesian ground floor, concreteunlimited
Old tilesunlimited
Floor heatingunlimited
Solid wood board≤300 x 300 mm(needs interface treating)
Outside wallCement mortar, clay bricks, concreteThickness≤20 mm
Old tilesThickness≤20 mm
Outside floorCement mortar, clay bricks, concreteuniimited
Old tilesunlimited
Special useSwimming pool≤300 x 300 mm
External thermal insulation systems≤20 kg/m2

Application properties

1) Application temperature: 5 °C ~35°C

2) Pot life: 3 hours

3) Open time: 20 min

4) Adjust time: 20 min

5) Mix ratio with water: 25kg powder/ 5.75 liter (1kg powder / 0.23liter )

6) Slip resistance 20kg/m2 no slip

Technical Data

Mix Ratio With Water25kg/ 5.75l
Pot life3 hours
Open time20 minutes
Grouting after24 hours
Full Service48 hours
FlexibilityGood
Temperature Resistance-30°C - 100°C
AgeingExcellent
Resistance to DampExcellent
Tensile Adhesive Strength (28 days)( JG158-2004)> 1 N/mm2

Tools

Rubber hammer,Trowel,Elec-mixer,Bucket

Notched trowel

Substrate requirement

The substrate should be hard, sound, dry, flat, clean and durable

Substrate Preparation
  • Substrate should be flat ,hard, level, dry, and clean with normal absorption
  • Clean the surface until free of grease, dust or any stains
  • Old paint or plaster should be removed
  • Substrate been repaired should be preserved at least 48 hours

Application Enviroment

  • Ambient temperature: 5°C~35°C
  • Avoid application if too hot or freezing weather
  • Avoid application under direct sunlight and strong wind

Safety

  • May cause serious damage to eyes
  • May be sensitive to skin in case of contact.
  • lrritable for eyes, respiratory system and skin
  • Keep out of the reach of children
  • Avoid breathing the dust
  • In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor
  • Wear suitable protective clothing,gloves and eye/face protection
Packaging Detail:Packed in 25kg plastic lined paper sacks
Delivery Detail:5 days

Related Product for SA Flexible Ceramic Tile Adhesive