SA Concrete Interface Treating Agent - SA 815

mortar 1)Easy to use,just mix it with water, 2)Good application ability, 3)Enforce adhesion between leveling mortar and concrete - details see: https://www.buildingsupplieshub.com/sa-concrete-interface-treating-agent-10082901
Place of Origin: Shanghai China (Mainland)Brand Name: SAModel Number: SA 815Usage: Joint Mortar
Type: Cement MortarQuality Management System: ISO9001: 2008  
SA Concrete Interface Treating Agent
contact supplier for SA Concrete Interface Treating Agent


Shunan concrete interface treating agent SA815

Aone-component, preblended, cemen-titious mortar which, when mixed with water, is used onto the concrete substrate.It can enhance the adhesive strength with concrete and other cement based mortar

Product information

1) Weight: 40kg

2) Color:grey

3) Consumption: 2.3~3 kg/m2

4) Shelf life & storage: 6 months after manufacturing date in dry ventilated place

5) Standard: JC/T907-2002

Field of Application

1)Suitable to use on the concrete,to avoid hollow and debonding

2)Suitable to use on the old leveling mortar

3)Interior and exterior for building

Limits to use

1)Not suitable to use on the gas concrete

2)Not suitable to use on oil substrate

Consumption:

2.3~3 kg/m2

Product specification

Application properties

1)Application temperature: 5°C~35°C

2) Pot life:4 hours

3)Water addition per 40 kg bag: 9.2 liters

Tools

Elec-mixer,Bucket,Trowel

Substrate requirement

The substrate should be hard, sound, dry, flat, clean and durable

Substrate Preparation

1)Clean the substrate until free from dust, oil, or any other stains

2)When high temperature season or dry substrate, substrate should be wet one day before

Application

1) Put 9.2 liters clean water in a bucket. Gradually add one bag (40 kg) of powder into water

2) Mix properly until homogeneous and lump-free

3) Leave the product for 5~10 minutes. Then mix the second time for 1~2 minutes

4) Apply the of product onto the substrate to a thickness between 1.5~2mm

5) Normally,after 90 minutes,level the substrate with cement mortar

Application Enviroment

1) Ambient temperature: 5°C~35°C

2) Avoid application if too hot or freezing weather

3) Avoid application under direct sunlight and strong wind

Safety

1) May cause serious damage to eyes

2) May be sensitive to skin in case of contact.

3) lrritable for eyes, respiratory system and skin

4) Keep out of the reach of children

5) Avoid breathing the dust

6) In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor

7) Wear suitable protective clothing,gloves and eye/face protection

Packaging Detail:Packed in 40kg plastic lined paper sacks
Delivery Detail:5 days

Related Product for SA Concrete Interface Treating Agent