SA Ceramic Mosaic Interface Treating Agent - SA822

SA Cementitious Mortar Used onto the Old mosaic and Tile for Renovation

one component, preblended, cementitious mortar which, when mixed with water,

is used onto the old mosaic and tile for renovation

Product information:

· Weight: 40 kg

· Color: grey

· Consumption: 3~4 kg/m²

· Shelf life & storage: 6months after manufacturing date in dry ventilated place

· Standard: JC/T907-2002

Field of Application

1)Suitable to use on walls and floors

2)Suitable to use on old mosaics and tiles

3)Suitable to use as a primer before fixing mosaics and tiles, or applying paint

4)Interior and exterior for building

Limits to use:

· Not suitable to use on oil substrate

Consumption

3~4kg/m²

Product specification:

Application properties:

1)Application temperature: 5°C ~ 35°C

2)Pot life: 4 hours

3)Water addition per 40 kg bag: 9.2 liters (0.23 liter/ kg powder)

Application:

1) Put 9.2 liters clean water in a bucket. Gradually add one bag (40kg) of powder into water

2) Mix properly until homogeneous and lump-free

3) Leave the product for 5~10 minutes. Then mix the second time for 1~2 minutes

4) Apply the 1st coat of product onto the substrate. After 24 hours, apply the 2nd coat.

Each coat should between 1.5~2 mm. Two coats are needed

5) Ensure a flat and closed surface Normally after 48 hours, apply painting or fix tile on it