Rotary-cut Sheet of Veneer

Rotary-cut Sheets of Veneer

Origin:the Russian Far East

Timber species: Larch

Standard Compliance:a)JAS MAFF Notification No.1751 dated of December 2, 2008 (only in the part of the section governing the requirements for veneer); b)Russian GOST 99-96; c) ISO 2426 –74 andISO 2428-74

Thickness: from (min) 1.5mm to (max) 4.0mm

Moisture:max. 8%at the exit from a drying tunnel in the plant

Typical Sizes:

1) 6 ft – Width: 950 – 980 mm (to be customized);

2) 6 ft – Length: 1.900 – 1.960 mm (to be customized);

3) 8 ft – Width: 1.250 – 1.270 mm (to be customized);

4) 8 ft – Length: 2.500 – 2.540 mm (to be customized).

Height of the foot of the Goods during packing:from (min) 800 mm to (max) 1.100 mm

Categories:

a) Face: Not spliced product. NWP (Natural Whole Piece). Long grain (Direction of the grain should be parallel to the veneer length). For use on the face layers of plywood;

b) Back: JWP (Jointed Whole Piece) acceptable. Spliced veneer along the long grain is acceptable. For use on the back layers of plywood;

c) CC (Center Core): Spliced veneer along the long grain is acceptable. For use in the inner layers of plywood;

d) SG (Short Core): Spliced product, JWP acceptable. Short grain (direction of the grain shall be parallel to veneer width). For use in the inner layers of plywood.

Sizes of the Pallets for transportation of the Goods:

a) 6 ft – 1.880 x 960 mm

b) 8 ft– 2.550 – 1.270 mm

MOQ:1 x 20ft container (load capacity: 14.4 cbm)

Volume of delivery:up to 10,000CBM/month

Annual production volume:300,000CBM

Terms of delivery: CFR-Buyer’s port, FOB-Russian port

Price:depends on the size, on the port of destination. Approximate Price for 6 ft veneer:

Face/Back – 470USD/cbm

CC/SG – 270USD/cbm

Payment Terms:T/T (deposit upon order confirmation and balance before shipment);

Irrevocable Confirmed L/C