Rockwool 50mm T 80kg/m3 - SA RWB

- Best class A1, - Easily cut,recyclable, - Non-combustible, - Chemically inert,thermal insulation, - Excellent sound absorbency - details see: https://www.buildingsupplieshub.com/rockwool-50mm-t-80kg-m3-10075652

Type: Other Heat Insulation Materials	Place of Origin: Shanghai China (Mainland)	Model Number: SA RWB	Thickness (mm): 25 -150
Length x width (mm): [1000-2400] x [600-1200]	Fire: Incombustible	Smoke or droplet class: None	Density: 60-260 kg/m3
Color: Dark green/a bit brown

contact supplier for Rockwool 50mm T 80kg/m3

Water-repellent Rockwool Insulation Boards

It's made from natural rocks such as basalt and limestone.The rocks are melted in a cupola and the molten lava is fiberized by a spinner. The inorganic fibers are bonded together using a thermosetting resin to form the final product which is cut into suitable sizes for easy handling and installation.

Finds its way into thousands of residential and commercial buildings as well as into industrial and OEM applications.

♦Rock mineral wool slab products offer a wide range of benefits, and can be used in an equally wide range of applications.

♦Rock mineral wool slabs offer exceptional fire performance characteristics, as well as excellent thermal and acoustic properties.

♦SA products further improve upon the benefits of slabs by being scientifically designed and manufactured to provide a very high level of compression resistance

The fibres are aligned in such a way as to dramatically increase the ability of the slab to resist heavy loads while maintaining the thermal, acoustic and fire performance

Other properties of rock mineral wool insulation:

vapour permeable ( " breaths" )

fire protection insulation

resistant to aging and decay ( long living )

resistant to micro organisms and insects

resistant to chemical substances

chemically inert and completely recyclable with an ecological production process

TYPICAL APPLICATIONS

Flat roofs

Membranes

Suspended ceilings

Insulation with an extra high fire classification in addition to wood wool (application underground parking).

External walls

Contact and ventilated

Internal and partition walls

Insulation with an extra high fire classification

Floors

Load bearing - impact sound insulation.

Insulation of industrial (power and chemical) plants

With wired mats (and facade lamella mats) used in thermal and acoustic insulation for industrial work, pipe sections, and airducts.

OEM

Panels, doors, chimneys, domestic appliances, acoustic barriers, HVAC.

Technical Data

Thermal conduction (average temperature 25 °c)	≤0.038 W/ (m • K)
Density	≥ 60 kg/m3 (4.0 lb/ft3)
Hot surface performance	≥ 600 °c
Tension strength	≥7.5 kPa
Linear shrinkage (%)	0
Compressive strength (10% deformation)	≥ 20 kPa (420 psf)
Quality moisture sorption	≤ 0.2 %
Acidity coefficient	≥ 1.6
Fire proof	A1(A)

Acoustical Performance

CO-EFFICIENTS AT FREQUENCIES

Thicknesses	125 Hz	250 Hz	500 Hz	1000 Hz	2000 Hz	4000 Hz	NRC
50mm (2.0")	0.26	0.71	1.14	1.09	1.04	1.03	1.00
75mm (3.0")	0.65	0.94	1.13	1.07	1.06	1.04	1.05
100mm (4.0")	0.92	1.04	1.07	1.07	1.07	1.08	1.05

Production Line

Manufacturing Process

REMARKS FOR EIFS SYSTEMS

• The temperature of air and glue must be from 5°C~35°C

• Avoid sunshine, high temperature and freezing

• Avoid strong wind during application

• Avoid rain during application

• Mineral Wool board must be applied closely one by one. The width of the gap must be less than 2mm,otherwise fill it with Mineral Wood strip. It is forbidden to fill with glue between two boards

• The level deviation between two boards must be less than 1.5mm

Packaging Detail:Supplied shrink wrapped in polyethylene or pallet

Delivery Detail:7 days