Reinforced Thermoplastic Polyolefin (TPO) Waterproofing Membrane - TPO-H

Reinforced Thermoplastic Polyolefin (TPO) Waterproofing Membrane, 1.Proven performance history of over 50 years - details see: https://www.buildingsupplieshub.com/reinforced-thermoplastic-polyolefin-tpo-waterproofing-membrane-10100348

Type: Waterproof Membrane,Waterproofing membrane	Place of Origin: Shandong China (Mainland)	Brand Name: Starring	Model Number: TPO-H
Width: 1.0m 1.2m 1.5m 2.0m 2.5m	Length: 15m 20m 25m	Color: Coppery Blue White Gray Yellow Green	Specification: Thickness:1.2mm/1.5mm/2.0mm
Samples: Can supply you for the free

Reinforced Thermoplastic Polyolefin (TPO) Waterproofing Membrane

Products Description

TPO waterproofing membrane combines both polypropylene (plastic) and ethylene-propylene (rubber) using

state-of-the-art polymer manufacturing technology.Plasticizer-free TPO membrane deliver long-term flexibility. The result is an ideal commercial waterproofing membrane that is reliable, cost effective,

environmentally friendly and easy to install.

Product Features

Membranes widths range from 6 feet to 12 feet wide
Membranes are typically 40 mils to 100 mils thick
Seams are sealed by heat welded with hot air
TPO membranes commonly are white

Application Range

Basement, tunnel, subway, pool
Green roof
Planting roof
Steel structure roof
The maintenance of old roof

Product Technical Parameters

No.	Test Item			Indicators
				H
1	Stretching Performance		Tension Strength Mpa≥	12
			Breaking Elongation%≥	500
2	Heating Treatment Size Change Rate%≤			2.0
3	Low-temperature Bending			-40°C No Craze
4	Water Impermeability			0.3Mpa,2h Water Impermeability
5	Impact Resistance			0.5kg·m , Water Impermeability
6	Seam Peel Strength N/mm ≥			4.0or Membrane Breaking
7	Right-angle Tear Strength N/mm ≥			60
8	Water Absorbing Capacity (70°C168h)%	After Soaking ≤		4.0
		After Airing≥		-0.40
9	Heat aging(80°C)	Time		672h
		Appearance		No blisters, cracks, delamination, bonding and holes
		Tensile Strength (max. tensile)Retention%≥		90
		Elongation Retention %≥		90
		Cold Bending		-40°C, No Craze
10	Chemical Resistance	Appearance		No blisters, cracks, delamination, bonding and holes
		Tensile Strength (max. tensile)Retention %≥		90
		Elongation Retention%≥		90
		Cold Bending		-40°C No Craze
11	Artificial climate accelerating ageing	Time		1500hb
		Appearance		No blisters, cracks, delamination, bonding and holes
		Tensile Strength (max. tensile)Retention %≥		90
		Elongation Retention %≥		90
		Cold Bending		-40°C No Craze