Pure white color artificial quartz countertop,island tabletop,kitchentop - A 2001

Quartz stone manufacturers - Top ten of Chinese

Capacity Introduction:

1) The earliest and leading company in China.

2) The member of NKBA, ICPA and ISSFA

3) Passed certification of WQA ,SGS and ISO9001:2000 and CE.

4) Can offer you the high quality products under the competitive price.

Detailed Product Description
Chinese quartz stone
1) 93% quartz and 7% resin
2) Incredibly hardness
3) Durable heat-resistance
4) Finest Intensity

5) Length: 2440mm, 3000mm , 3050 mm,3200mm.
6) Width: 1400mm ,1450mm ,1500mm,1600mm, 1800mm.
7) Thickness: 15mm 20mm 30mm

8)15mm thickness tile weight: 35.7KGS/SQM;

20mm thickness tile weight: 47.6 KGS/SQM;

30mm thickness tile weight: 71.4KGS/SQM.

9) Application: Slab, Countertop, Kitchentop, Vanitytop,

Tabletop.Floor, Wall tile.Decorative Borders and so on.

10)Mono Color, Pure Color, Multi-color, Tri-color, Dark Color,

Client's colors are also welcome

Product show:

Factory show:

Certificate:

You may also like:

Care & Maintenance

Quartz Surfaces are non-porous and highly resistant to stains and penetration of spills into
deeper layers of the surface.

DAILY ROUTINE

Just use water, dish soap, and paper towel or a damp sponge to absorb any spills after food preparation. If needed, use any non-abrasive cleaner such as Formula 409, Lysol, Windex, and Fantastic to wipe away any excess. Be sure to dry the area thoroughly with a clean cloth.

TOUGH SPOTS

Leave any of the above cleaners to sit on the affected area for a few minutes;

Soak the affected area with pads of paper towels for 5 to 10 minutes;

Scrub the area gently with a non-scratch pad such as Scotch Brite pad in circular movement;

Rinse with clean water thoroughly;

Dry thoroughly.

For even tougher spots, use Soft Scrub Liquid Gel (with or without bleach). Leave the gel to sit on the affected area for a longer time and follow the same steps above. If needed, apply Windex streak free as the final step to clean any gel residue.

REMOVING ADHERED MATERIALS

(gums, nail polish, paint, etc.)

Scrape the surface with a plastic putty knife or a razor. Quartz Surfaces are very hard and will not be harmed by razor edges.

Rinse with clean water thoroughly;

Dry thoroughly.

Any gray marks left by the blade can be removed with Soft Scrub Liquid Gel.

If necessary, use Windex streak free to clean any gel residue.

HONED, LEATHER FINISH

Honed and leather finish surfaces require more daily maintenance than polished surfaces. Finger prints, wet spots, metal marks, and other signs of daily living show more on these types of surfaces.

Apply the same cleaning guidelines with more frequency and gentler cleaning movement. If necessary, use Soft Scrub Liquid Gel to remove any difficult spots.

Honed and leather finishes are not recommended for high traffic areas.