Polymer bonding mortar with thermal insulation Mortar - CT

1:Water impermeability effect., 2:water-redispersible copolymer powder, 3:High quality - details see: https://www.buildingsupplieshub.com/polymer-bonding-mortar-with-thermal-insulation-mortar-10082692

Place of Origin: Shandong China (Mainland)	Brand Name: CaiTong	Model Number: CT	Usage: Joint Mortar
Type: Cement Mortar

Polymer bonding mortar with thermal insulation Mortar

Introduction :

Polymer modified cement mortar is made of cement , aggregates and can be dispersed in water, the organic polymer was pressed . There is a polymer may be a homopolymer of monomer polymerization , but also by two or more monomeric polymerized copolymer . The polymer film at ambient conditions to cover the child on the cement particles , and to the cement and aggregate to form a strong body bonding. Polymer network must have the ability to prevent the occurrence of micro-cracks , and can prevent crack propagation .

The mortar has excellent adhesion , cracking , frost , seepage, corrosion, resistance to chloride ion penetration, anti-aging and corrosion resistance , suitable for marine , sluices , waterfall, harbor works, roads, bridges, metallurgical, chemical, industrial floors and civil steel and reinforced concrete structures such as impermeable , corrosion surface protection and repair works.

Feature:

A:Water impermeability effect.

B:High bond strength, can be formed integrally with the structure .

C:Corrosion resistance , mortar resistant to acid , alkali, salt and other corrosive chemicals .

D:Humidity-resistant , anti-aging , good frost resistance .

E:Non-toxic water-based products , in line with environmental requirements.

Application :

A:Structural concrete reinforcement, waterproofing plugging air defense facilities .

B:Dams , ports seepage .

C:Hot tub , landfills , chemical storage , chemical tank and other chemical-resistant buildings.

D:Road, bridge , tunnel, culvert concrete repair .

E:Industrial and civil construction roofing , bathroom, basement seepage treatment .

F:Steel and reinforced concrete waterproofing .

Technical indicators

Shape	Powdery gray uniform
Bonding Strength	Original strength ≥ 1.0Mpa
	Water resistant≥ 0.8Mpa
	Freeze-thaw resistance ≥ 0.5Mpa
Operational time	≥2.0h
Pilot project	Standards Demand	Performance indicators
Tensile bond strength ( with cement mortar )	Normal condition	Mpa≥0.7 0.71
Tensile bond strength ( with cement mortar )	Water resistant	Mpa≥0.5 0.67
Tensile bond strength ( with cement mortar )	Freeze-thaw resistance	Mpa≥0.5 0.57
Tensile bond strength ( with expanded polystyrene board)	Normal condition	MPApolystyrene plate damaged more than 0.1 or 0.1 polystyrene board failure
Tensile bond strength(with expanded polystyrene board)	Water resistant	MPA polystyrene plate damaged more than 0.1 or 0.11 polystyrene board failure
Tensile bond strength ( with expanded polystyrene board )	Freeze-thaw resistance	MPA polystyrene plate damaged more than 0.1 or 0.1 polystyrene board failure