Polyester (Pet) /Polypropylene (Pp) Short Fiber Needle Punched Non-Woven Geotextile - 100-800g/sqm

needle punched nonwoven geotextile, Width: 1-6 meters, Length: 30-100m, Weight: 100-800g/sqm, ISO9001:2008 listed - details see: https://www.buildingsupplieshub.com/polyester-pet-polypropylene-pp-short-fiber-needle-punched-non-woven-geotextile-10059280

Type: Geotextiles	Place of Origin: Shandong China (Mainland)	Brand Name: Z.K.	Model Number: 100-800g/sqm
Geotextile Type: Non-Woven Geotextiles	width: 1-6 meters	length: 30-100m	weight: 100-800g/sqm
gram weight range: 100~550g/m2	tensile strength: 15-120KN/m	tear strength: 300N~1200N	bursting strength: 1.6-7.5KN
elongation at break: 25-100(MD&TD)	material: HDPE, PVC, EVA,PP,PET	color: white, black

Polyester (Pet) /Polypropylene (Pp) Short Fiber Needle Punched Non-Woven Geotextile

contact supplier for Polyester (Pet) /Polypropylene (Pp) Short Fiber Needle Punched Non-Woven Geotextile

Our geotextile can be made of polypropylene (PP) or polyester (PET) . The weight is available from 100g/m2 to 1200g/m2 and the width from 1m to 6m, two kinds of processing technical to select: needle punched and thermally bonded, long fiber or short fiber. All kinds of colors are available.
It is widely known as earthwork material and industry fabric, used in the areas of railway, highway, water conservancy, dam, tunnel, subway, environment protection and so on.
We can supply different specifications as customers' request.

1.Geotextile has good air and water permeability to let water flow through it so as to effectively control sandrock running-down.

2.Geotextile has good water transmissibility, it can form drainage channels inside soil mass to drain redundant liquid and air out of the soil mass.

3.Geotextile helps to enhance the soil mass' tensile strength and non-deformability and structural stability so as to improve soil mass quality.

1.It can effectively make the concentrated stress diffuse, transfer or decompound, and prevent the soil mass against the destruction of outside force.

2.It can prevent the mixture of sandstone, soil mass and concrete of upper and lower layers.

3.Its mesh is hard to jam by virtue of the compliancy and motility of the reticulation formed by indefinite form fibrous tissue.

4.High water permeability-it can keep good water permeability even in the pressure of soil and water.

5.Corrosion resistant-it is made from polypropylene fiber or terylene or other chemical fiber, featuring resistance to acid and alkali and oxidation, non-corroding, no worm-eaten.

6.Easy construction-low weight, easy operation, simple construction

No.	Item	Specification											Note
No.	Mass per square meter g/m2	100	150	200	250	300	350	400	450	500	600	800	Note
1	Weight Variation %	-8	-8	-8	-8	-7	-7	-7	-7	-6	-6	-6
2	Thickness mm ≥	0.9	1.3	1.7	2.1	2.4	2.7	3.0	3.3	3.6	4.1	5.0
3	Width Variation %	-0.5
4	Breaking Strength KN/m	2.5	4.5	6.5	8.0	9.5	11.0	12.5	14.0	16.0	19.0	25.0	MD and CD
5	Elongation at Break %	25 ~ 100											MD and CD
6	CBR Mullen Burst Strength KN≥	0.3	0.6	0.9	1.2	1.5	1.8	2.1	2.4	2.7	3.2	4.0
7	Sieve Size 090 mm	0.07 ~ 0.2
8	Vertical Permeability Coefficient cm/s	k× (0.1 ~ 0.001)											k=1.0-9.9
9	Tear Strength KN ≥	0.08	0.12	0.16	0.20	0.24	0.28	0.33	0.38	0.42	0.46	0.6	MD and CD
Needle punched geotextile after treatment method: Singeing, Calendar,Heat-setting, the film cover,steep glue setting. Shell membrane surface treatment

PET continuous filament spunbond needle punched nonwoven geotextile(representative average data.)
Test Item/Unit/No.			HY100	HY150	HY200	HY250	HY300	Test Method
Mechanical Properties
Tensile Strength	CD	kn/m	4.8	8.3	10.9	14.5	18	ASTM D 4595
Tensile Strength	MD	kn/m	7	12	14	18	22
Elongation at maximum load	CD	%	65	64	63	62	61
Elongation at maximum load	MD	%	64	63	62	61	60
Grab Strength	CD	kn ≥	0.36	0.58	0.87	1.08	1.35	ASTM D 4632
	MD	kn ≥	0.42	0.78	1.07	1.33	1.6
Grab Elongation	CD	%	55	55	59	59	60
	MD	%	50	50	51	51	53
Trapezoidal Tear	CD	kn ≥	0.16	0.23	0.31	0.39	0.46	ASTM D 4533
	MD	kn ≥	0.245	0.31	0.42	0.46	0.55	ASTM D 4533
Burst Strength-CBR plunger method		kn ≥	0.85	1.47	2.3	2.8	3.3	ASTM D 6241
Puncture resistance		n ≥	220	320	430	540	650	ASTM D 4833
Mullen Burst		Mpa	1.2	1.8	2.3	2.8	3.3	ASTM D 3786
Cone drop resistance(hole-Φ)Dynamic perforation diameter		mm	34	30	26	22	19	BS EN 918-1996
Hydraulic Properties
Flow Rate,Q100		L/s/m²	200	210	180	150	140	ASTM D 4491
Permeability		cm/s	0.48	0.43	0.39	0.36	0.34	ASTM D 4491
Apparent Opening Size O95		mm ≤	0.13	0.12	0.12	0.11	0.11	ASTM D 4751
Apparent Opening Size O90		mm ≤	0.12	0.11	0.11	0.1	0.1	ASTM D 4751
Physical Identification Properties
Thickness 2KPa		mm	1.1	1.3	1.8	2.5	2.9	ASTM D 5199
Mass per unit area		g/m²	100	150	200	250	300	ASTM D 5261
Width		m	2/3/6/	2/3/6/	2/3/6/	2/3/6/	2/3/6/

Filtration of soils in drainage applications by retaining soil particles while allowing for the free flow of water
Separation and stabilization in road and railway construction
Prevention of soil movement in erosion control measures
Cushioning and protection in many containment projects

Packaging Detail:standard export packing or as customers' need

Delivery Detail:10-20days after the contract is effective