Plastic paving geonat - TGSG

Plastic paving geonat, high strength,low creepage, good quality,low price - details see: https://www.buildingsupplieshub.com/plastic-paving-geonat-10057429

Type: Geogrids	Place of Origin: Shandong China (Mainland)	Brand Name: EASTAR	Model Number: TGSG
Material: PP/PET/fibreglass,PP/HDPE	product: Geogrids	tensile strength: 15-100KN/m	width: <=6.0m
length: 50~100m

Plastic soil stabilization geogrid

Plastic paving geonat

Specifications

model:15-15 20-20 30-30 40-40 45-45
high strength,low creepage
good quality,low price,
width3.95M length50M

Details:

product:biaxial geogrid

material:PP

tensile strength:15-45KN

roll width:3.95m

roll length:50m

Biaxial GeogridProducts Introduction: Biaxial geogrids are made of macromolecule polymer by the process of being stretched out, formed into lamella, punched regularly and then longitudinal and transverse elongated, which have much higher longitudinal and transverse tensile strength, especially in its prophase. Biaxial geogrid structure can supply a linking system to soil, which be used broadly to enable the permanent bearing capacity of roadbed.
Usage: 1, Biaxial geogrid suitable for strengthening road and railway base. Improve loading of road and railway base, extend usage validity. Prevent surface of road and railway from
breaking. Reduce maintaining charges. Shorten construction time. 2, Biaxial geogrid increase loading capacity of base. Prevent land soil from sinking; including embankment, slopes, tunnel, airfields, parks, docks and so on. 3, Biaxial geogrid tighten slopes to proof water and soil from losses. 4, Biaxial geogrid reduce the surface thickness of the ground. 5, Biaxial geogrid prevent tunnel from crack occurring. 6, freely construction, save time and cut down the cost of maintenance.

Specification:

Item	Tgsg15-15	Tgsg20-20	Tgsg30-30	Tgsg40-40	Tgsg45-45
Longitudinal tensile strength ≥(KN/M)	15	20	30	40	45
Transversal tensile strength ≥(KN/M)	15	20	30	40	45
Tensile strength at 2% longitudinal strain>= (KN/M)	5	7	10.5	14	16
Tensile strength at 2% transversal strain >=(KN/M)	5	7	10.5	14	16
Tensile strength at 5% longitudinal strain ≥(KN/M)	7	14	21	28	32
Tensile strength at 5% transversal strain ≥(KN/M)	7	14	21	28	32
Width(m)	4.0+0.2, 6.0+0.2
Longitudinal elongation at max strain ≤%	15
Transversal elongation at max strain ≤%	13