Pe Geocell

The polymer used to manufacture the geocell shall be virgin, non-thermally degraded polyethylene which is clean and free of any - details see: https://www.buildingsupplieshub.com/pe-geocell-10058088

Type: Geocells

Place of Origin: Shandong China (Mainland)

Brand Name: Jennyever

ultrasonic welded: perforated textured

HDPE GEOCELL TECHNICAL DATA:

	TEST METHOD	TEST VALUE
Polymer Density	ASTM D 1505	.941 g/cc - .960 g/cc
Sheet Gauge	ASTM D 5199	50 mil+4 mil (1.25 mm+.10 mm)
Carbon Black Content	ASTM D 1603	1.5 percent minimum weight carbon black
Environmental Stress Crack Resistance (ESCR)	ASTM D 1693	4,000 hr. minimum
Seam Hang Strength	4” (101.6 mm) weld joint supporting load of 160 lb. (72.5kg) OR	30 days minimum
Seam Hang Strength	4” (101.6 mm) weld joint supporting load of 160 lb. (72.5 kg) while undergoing temperature change from 74^oFto 130^oF (23^oC to 54^oC) on 1 hour cycles	7 days minimum
Seam Peel Strength, minimum	U.S. Army COE Tech Report COE GL-86-19, Appendix A	Cell Seam Strength 65.5 lb (292 N) per inch of Cell Depth