Package MBR plant for wastewater/sewage/ effluent treatment - 1-2000000T/D

MBR Series Wastewater/Sewage Treatment Plant

1) MBR Ultra filtration Membrane Module in PP or PVDF materials.

MBR Series

1) Material of hollow fiber capillary: PP(polypropylene) or PVDF(polyvinylidene Flouride)

2) I/O Diameter of capillary: 320μm ~350μm (PP) 1.3/0.8 mm(PVDF)

3) MWCO(Dalton) of capillary: 300-500K

4) Pore Size(um) of capillary: 0.1 um (0.1Micron)

5) Filtered type of capillary: Outside-In Hollow fiber

6) Material of Collecting fitting: ABS with PVC barrel uniou.

7) Casting Material(Seal): Epoxy Resin

And

Maintenance

1) Recommended operating Pressure : - 0.01~ -0.05MPa

2) Recommended operating Pressure : 0.1~0.15MPa

3) Type of flushing&cleaning: Backward Flushing / Chemical Dosing/ uninstalled Chemical cleaning

4) Temperature : 4-45°C

5) PH : 0-14

6) Continuous chlorine resistance : 1000PPm

Ultra filtration

1) Fiber is with the highest mechanical intensity, high anti-pollution ability, easy to clean, especially suitable to Sewage& wastewater treatment.

2)Good chemical stability, Resistant to Acid& alkali, Anti-bacterial corrosion, long lifespan( ≥3years)

3)Air blowing can scour &clean the surface of fiber, to maintain a stable output effluent.

4)High filter area, High filter flowrate

5)Uniform& symmetrical; pore size on fiber surface, can ensure a best entrapping.

6)Filtration down to 0.1 micron

7) Removes bacteria and viruses of water up to 99.99%

8) Simplest installation and operation

9) Absolute cost savings & reduction in maintenance cost

10) Separate big molecule matter, colloid and organic in water, entrap bacteria, algae etc.

11) Macromolecular Organism is degradable in this process.

12) Specially design to meet the flowrate required and space savings

1) Industrial/Commercial Wastewater Treatment

2) Domestic Sewage Treatment Plant

3) Chemical Wastewater Treatment

4) Wastewater/ Sewage Recycle/Reuse