Motor linear 24V Door-closing device - OK618

mini linear actuator

1.You need to decide what stroke length and force actuator you need. The stroke length is the length the actuator moves through. So as an example a 12" Stroke actuator will move 12", but note that the total length of the actuator when retracted will be about 4.3" (105mm) longer than the stroke. So a 12" stroke actuator,the total retracted length is about 17.3" and 29.3" extended (17.3"+12").

2.The Min installation length( the total length when stroke retracted) of the actuator is about 4.3” (105mm, when stroke is 0mm) and it only can add but reduce. For example, you need stroke 10”,so the Mini installation length is 14.3” , we can increase this length based 10”stroke,but can not reduce it.

3.The actuator itself is 12v or 24v DC, so if you have 12v or 24v electric power and switch, you can directly connect the actuator to them. If have no this voltage power, we can provide the control parts( switch power supply, adaptor, remote control. Like the bellow picture 1 show ). Remote control has wired and wireless type, Wireless is RF style. Adaptor is the receiver of the remote control. And the adaptor , remote control have to work together to operate. If you change one,you have to change another.

1. 12v/24V DC permanent magnet motor

2. Thrust up to 1000N in push and in pull.
3. Elegant and compact design with small installation dimensions.
4. Stroke: 50-500 mm
5. Steel back fixture, can be adjustable
6. Standard protection class: IP54

7. Noise level 48 dB(A): actuator not loaded anythings.

8. Duty cycle: Max 10% or 2 minutes continuous use followed by 18 minutes not in use

Drawing:(mm)

Drawing:(inch)