Modified epoxy grout (E-7) - E-7

1.High strength, low viscosity and good groutability, 2.Well permeability, 3.Multifunctional - details see: https://www.buildingsupplieshub.com/modified-epoxy-grout-e-7-10100488

Type: Other Waterproofing Materials	Place of Origin: Guangdong China (Mainland)	Brand Name: Elokt	Model Number: E-7
Viscosity , mpa.s: ≤100	Curing time , h: ≤48	Usage: Tunnel, metro and crack of the girder, pillar and pile,dam, wharf	Product features: High strength and adhesive strength,good groutability

contact supplier for Modified epoxy grout (E-7)

E-7 Modified epoxy grout

Introduction

It is mainly made up by epoxy resin, curing agent and other catalyst, it is a grouting material which has high strength and adhesive strength.

Product features

High-performance: high strength and adhesive strength;

Convenient and efficient: can be adjusted the proportion according the construction temperature;

Good groutability: low viscosity and good groutability, even to the tiny crack;

Multifunctional: reinforce, strengthening, leaking stoppage, waterproofing and corrosion

prevention.

Range of application

Reinforce, strengtheningand leaking stoppage for:

1. Tunnel, metro and other underground structure;

2. The crack of the girder, pillar and pile;

3. Dam, port, wharf, swimming pool and water tower.

4.Seal of the water pipe and chemical pipeline.

Technical index

Executive standard: Q/SDKS 015-2008

No.	item		index
1	viscosity , mpa.s		≤100
2	curing time , h		≤48
3	compressive strength, Mpa,28d		≥50
4	compressive strength, Mpa,28d		≥8
5	bonding strength	dry base course, 28d	≥1.5
		wet base course, 28d	≥1.0

Main points of construction & Notice

Ratio:modified epoxide resin: curing agent= 10:0.7~1 (weight), pour the curing agent into modified epoxide resin, handcraft or use motor stirrer to stir for 1 min.

*Use grouter to proceed pressure grouting, close the grout nipple when it is full.

*Cut the exposed grout nipple after 72 hours, and use cement mortar to recover.

*Use it up once mixing.

*Keep the construction site ventilated and the temperature shall be over 5°C.

*Wear labour protection appliance and pay attention to pressure gage to avoid blasting.

*Use acetone to wash the tools.

Packing

Modified epoxy: 5kg/tin, 10kg/tin, 20kg/tin

Curing agent: 0.5kg/tin

Storage and transport

Store in well-ventilated place and dry place, and keep from fire.

Avoid exposing to the sun and rain, and prevent impinging and pressing.