manufacturer of truss girder for construction

Lattice or Truss Girders are mainly used for the prefabrication of concrete planks. - details see: https://www.buildingsupplieshub.com/manufacturer-of-truss-girder-for-construction-10088411

Place of Origin: Shandong China (Mainland)

Brand Name: lianhuanjingong

manufacturer of truss girder for construction

contact supplier for manufacturer of truss girder for construction

upper chord (mm)	Φ5-Φ12	Φ5-Φ12
lower chord (mm)	Φ5-Φ12	Φ5-Φ12
diagonal(mm)	Φ4-Φ8	Φ4-Φ8
pitch distance (mm)	190-210(as required )	190-210( as required)
height(mm)	70-300 (as required )	70-300 (as required )
width(mm)	60-80 (as required )	60-80(as required )
length (mm)	200~12000	200~12000

A truss girder is a steel-framed support system placed atop the truss plank between each run of the hollow block underlayment system for concrete slab floor formations. The triangular shape of the truss girder provides stability for the slab system between the block structures. It also provides a means of shift prevention throughout the slab design.

These girders are used mainly in suspended concrete floors because of their ability to provide a full span of support for the slab. They prevent any type of buckling in the slab due to the also disallowed shifting. Though there are many different components to these types of concrete flooring systems, the truss girder is one of the most important factors in the stability of the slab.

The construction of the truss girder is commonly comprised of three different deformed bars that run longitudinally across the span of the slab. These are held in shape by electro-welded support systems welded to each longitudinal bar within a foot (30 cm) of each other through the entire span of the truss girder. This shape and electro-welded construction allow the truss girder system to provide an ample amount of tensile strength and resistance to withstand force from any direction.