Laminated Veneer Lumber ( LVL Construction Beam ) - 1000mm x 5000mm x 25mm - 120mm

Laminated Veneer Lumber ;

Building / Structural LVL Beam ; Packaging LVL

Scaffolding Board

Fumigation Free

(Samples Are Available )

Laminated veneer lumber (LVL) is a structural product manufactured from thin rotary peeled veneers of wood usually 3mm thick, glued with a durable adhesive with the grain running parallel to the main axis of the member.

These panels have excellent bending resistance, tension and compression properties and greater load-bearing capacity than traditional materials.

Material: poplar or eucalyptus
Sizes:Benefits
Reduced twisting, warping and splitting, makes LVL easy to build with, providing time and cost savings.
Length: 2,440, 3,950mm
Width: 50 to 1,220mm
Thickness: 25 to 100, 42/44,
Regular Size : 2,440 x 1,220 x 25/42/44m
Glue: MR, E2, E1,WBP
Minimum order quantity: one 40ft HC
LVL can be used for horizontal and vertical solutions, providing a dimensional precision which gives architects greater design possibilities.

Good for long spans, with minimal deflection, LVL is ideal for roof/floor joists and lintel/framework studs, both in new build and renovation, where strength is needed. The timber that LVL is manufactured from comes from sustainably managed forests.

Specification
• Available in a wide range of sizes
• With a grain that runs longitudinally through the veneer layers, LVL is specially kiln dried to 10-15% moisture content

Uses: for all kinds of fumigation-free packaging ; formwork ;Construction beams, rafters and columns for wide range of buiding structurals .

LVL is often used to complement the use of sawn timber in domestic construction. In commercial or industrial structures it is often used as a wood-based alternative to structural steel or reinforced concrete.

Generally LVL is chosen when sawn timber is not strong enough to support the structural, or longer lengths are needed.

Packaging Material for mechanical Eequipment

Quality standard:
Even thickness, no unglued and no bubble, on the face
The color should be consistent
No glues passing through, no worm bore
No mildew and no crack
Can be jointed or repaired in the back
Static bending strength: ≥50MPa
Modulus of elasticity: ≥7,000MPa