JZG066 Automatic slagging and 0.4R /min rotating speed reactionstill - JZG-066

JZG066 Automatic slagging and 0.4R /min rotating speed reactionstillThe raw materials

waste tire,waste plastic,waste rubber

The out put product

The rate of oil yield is 45%-50%.

this pyrolysis machine can pyrolysis the waste tires/plastics,

output fuel oil, steel wires and carbon black without pollution.

waste tire recycling reactionstill dimension: D2200mm x L6600mm(D = diameter L= length)
Material: Plastic rubber (tires), life garbage

· Structure: Horizontal type revolves

· Oil yield (tire as raw materials): 40%-45%

· Carbon black: 30 to 35%

· Steel wire: 10 to 15%

· Gas: 12 to 15%

Security-negativepressure system

The main equipment is of high safety. The phase of the unliquefizable waste gas produced during

the process is alkyl from C1to C4, which is dangerous when burning directly. In our process, it is

transferred first through a water close device and a safety device- burning air muzzle. Before burning, we should ensure the safety of production.

Environmental Protective

Dispose waste gas, liquid, and residua in the process:

a. Waste gas: Transferred through two safety device: water close &burning air nozzle. Fully burnt,

not only eliminated pollutant but also minimized the quantity of fuels. For smoke dust discharge, we

apply series machines of patent in our company Desulphurization and dust remover which could co

ntrol the smoke dust discharge amount meet relative standards of GB-2001.

b. Waste liquid: Produced waste acidic water in the process of oil disposing (50kg process from

1 ton of oil easy to process for small quantity). counteract the liquid by alkalescent liquid solution. Aft

er three stage of filtration, the litmusless waste water was introduced to evaporator (use the heat of t

he flue of main processor as its heating resource)

c. Waste solid. The solid residua will be left after the catalyst splitting from scrap plastic, approxim

ately composes the waste plastic weight about 5% to 10%. Its main component is the black carbon. It

can be the raw material of the production industry of black carbon. Also could be mixed with the pulve

rized coal ash which produces for the raw material thermal power plant, also could be the raw material

of manufacture pulverized coal ash brick

(one kind of environmental protection building material).

Work pressure: Normal Pressure

· Cooling Method: Water

· Fual material: Coal, Wood, Fuel gas, Fuel oil, charcoal, LPG

· Capacity: 10tons per day.