JMJ168/4.6-DC-(500Kg) Remote Control Gate Operator - JMJ168/4.6-DC-(500Kg) Remote Control Gate Operator

JMJ168/4.6-DC-(500Kg) Remote Control Gate Operator

Main specifications and technical parameter

1.Environment air temperature changed according to the season

2.Relative humidityis less than 90%

3.Short-term operated, can notcontinuous operation for more than 10 minutes

Type

Adaptable Voltage

Rated

Power

(W)

Rate Load

(kg)

(N.m)

Rotate

Speed (r/min)

Brief

AC&DC rolling door motor is our company's best-selling products,it can use when AC power is off.

1. AC motor with low voltage and strong power. It have high efficiency, low noise, long life.
2. Adopt the machine limit device, simple adjusting and sensitive location controller.
3. Adopt currency power in regular state. Auto turn to battery supply while the power is broken.
4. Reserve power supply on the market used batteries for universal product (4.5 Ah / 12v); safe voltage: 24V.
5. DC operation, in the case with no electricity, AC and DC drive rolling door motor running, no load less than 40 times

Information

Carefully read and follow all safety precaution and warnings before attempting to install and use rolling door operator, incorrect installation can lead to severe injury.

1. The rolling door operator should be installed by a qualified technician; otherwise, serious personal injury or property damage may occur.

2. Notify the users that the door operator is never to be operated unless it is in full view.

3. Keep remote controls away from children, to prevent the door from being activated involuntarily.

4. Before any job on the door operator, cut out electrical power.

5. DO NOT in any way modify the components of the rolling door operator, otherwise serious personal injury or property damage may occur. We do not accept responsibility for damage or injury resulting from installing this door operator.

6. When opening or closing the door, do not attempt to walk or drive through the door.

7. The rolling door operator must be grounded.

8. Do not pull the hand chain or release lever during opening or closing the door.

9. Do not close the door by pulling the release lever as normal working mode, otherwise, serious personal injury or property damage may occur. (It’s only an emergency mode)

10. To protect the door from crash, engage the release lever quickly while the door is going to reach the closed position, then pull the release lever again to close the door lightly.

11. Regularly check the rolling door operator. If you have any problem, please contact our sales agent.

12. Our company reserves the right to change the design and specification without prior notification.

Can open the new mould according to original sample or technical drawings

1. 100% copper material inside the motor.
2. aluminum wire(optional)

1 year

Can provide various packing for you according to your requirement.

CE, ISO9001

Delivery time is determined by the amount of your order.

EXW price, very competitive prices, the more you order, the lower price will be.

T/T, L/C

We are a factory, we were founded in March 2003, we specializes in rolling door motor for more than11 years.and cover an area of 8000 square meters in Fujian. As a professional manufacturer of ACrolling door motors, AC&DC door motor, fireproof door motors, Garage Door and Entrance Gate Operators, garage door opener, remote control, UPS and other related peripherals.

Name:Liillian Lee

Alibaba ID: haohuamotor

Phone No: 008615860348867

Factories site: No.13.Vertical Two Road, Chaoyang Industrial Zone, Longwen District, Zhangzhou, Fujian, China.