J.K. Wall Putty - 00104

JK Wall Putty

White cement based putty for luxurious and silky interior/exterior finish of your dream home
JK Wall Putty is White Cement based putty for cement plastered walls and ceilings. J.K. Wall Putty is used to fill the uneven surfaces of cement plastered walls and concrete walls. Application of J.K. Wall putty provides smooth and strong finish to the walls for further application of all kinds of paints. The smooth finish gives better look to interiors and exteriors.

Surface Preparation

The surface should be cleaned to make it free from dirt, dust, grease, oil and paint. All foreign impurities should be removed with a wire-brush. Wall surfaces should be cured so that the surface is saturated with water yet in ‘touch dry’ condition.

Treatment of New Surface

The new surface requires only soft treatment such as removal of dust, dirt and foreign matter. In case of cracks, voids and damages; it should be patched up prior to application of J. K. Wall Putty with grey/white cement.

Treatment of Old Surface

All loose material and/ or organic growth must be removed with Putty blade or brush. In case of old painted surface scrub the surface with coarse emery stone/paper.

Preparation of J.K. Wall Putty Paste

J. K. Wall Putty is a fine powder. Mix slowly J. K. Wall Putty with approx. 40% water by volume to prepare paste of desired consistency. Mix vigorously for 5-10 minutes for making lump free, uniform and smooth putty paste. Product should be mixed in required quantities to be used within 2-3 hrs of its preparation.

Application

Apply uniformly the first coat of J.K. Wall Putty with blade/trowel on the wall from bottom to top. Apply second coat after the first coat has dried completely. Limit the total thickness of 2 coats to 1.5 mm. Allow complete drying and then use fine emery paper to remove the application mark if any. Any kind of paint can be applied on this surface. Use water for curing before applying paint.

Precaution

Although J.K. Wall Putty does not contain any toxic material, use rubber gloves while mixing, as prolonged exposure with water may soften the skin resulting in fine cuts/legions due to cement particles. Precaution should be taken to avoid dust inhalation while handling the powder putty.

Storage

Store J.K. Wall Putty in a dry place and open the pack just before use. Keep out of reach of children.