Internal Ceramic Tile Adhesive Vendor - SA812

Tile glue, - No need to soak tiles, - Single component,just mix with water, - Easy application, - Long lasting durability - details see: https://www.buildingsupplieshub.com/internal-ceramic-tile-adhesive-vendor-10082786
Place of Origin: Shanghai China (Mainland)Brand Name: SAModel Number: SA812Usage: Joint Mortar
Type: Cement MortarQuality Management System: ISO9001:2008Raw Materials: Cement, mineral fillers and additives 
Internal Ceramic Tile Adhesive Vendor
contact supplier for Internal Ceramic Tile Adhesive Vendor


Shunan Ceramic Tile Fixing Glue

- High-performance cementitious adhesive with long open time for ceramic floor and wall tiles.

Tiles are installed with mortar, which is basically a type of cement spread on the back of the tile or on the surface you are tiling. After all the tiles are set into the mortar and leveled out, the mortar must harden for at least 24 hours. At this point. grout is applied to fill in all the gaps between the tiles.

· Weight: 25kg

· Color: grey

· Standerd: JG/T547-2005

· Shelf life: one year from production date

· Storage: unopened bag on plate in dry place

· Production date & batch number: Find on outside of bag

Field of Application

· Used for fixing high porosity tiles (water absorption more than 6%)

· Used for fixing tiles on internal wall and floor

· Used for fixing tiles on dry and damp area

· Used for fixing tiles on rigid substrate

· Tiles fixed on walls suggested to be less than 20kg/m2

Consumption

5 - 6.5 kg/m2

Application properties

• Application temperature: 5°C~35°C

• Pot life:4 hours

• Open time:15min

• Adjust time: 15 min

• Water addition:0.23 liter/kg powder(6liter / 25kg)

Technical Information

Items

Data(Unit: N/mm2)

Pull-off bonding strength≥0.5
Pull-off bonding strength after soaking≥0.5
Pull-off bonding strength after heat aging≥0.5
Open time,20 min pull-off bonding strength≥0.5
Pull-off bonding strength after cycles

of freezing and thawing

≥0.5

Tools

Rubber hammer, Trowel, Elec-mixer, Bucket

Notched trowel

Substrate requirement

The substrate should be hard, sound, dry, flat, clean and durable

Substrate Preparation

1)Substrate should be flat ,hard, level, dry, and clean with normal absorption

2)Clean the surface until free of grease, dust or any stains

3)Old paint or plaster should be removed

4)Substrate been repaired should be preserved at least 48 hours

Application Enviroment

1) Avoid application if too hot or freezing weather

2) Avoid application under direct sunlight and strong wind

Packaging Detail:Double anti moisture 25 kg bag, also available on request
Delivery Detail:3 days

Related Product for Internal Ceramic Tile Adhesive Vendor