Hot Sale Wall mounted Adhesive Bathroom Rack - MS81001-4

Hot Sale Wall mounted Adhesive Bathroom Rack

Bathroom Rack
1.Fix it with strong sticker;
2.No nail, No hole,No glue;
3.Unique Design;
4.Export to all over the world.

Bathroom Rack Feature:

Parameter for Bathroom Rack :

Bathroom Rack Install Ways:

First, Clean the surface and ensure no water, dust, oil and wax before installation.

Second, Peel the protective film on the backside;

Third, install the magic sticker on the cleaned surface.

Then, press a little hard on the sticker surface about 10 seconds, to push out the air from underneath;

Finally, Hang hook in the buckle properly, snap the buckle down, when hear the sound “ cut ” you can use it at your will.

Removal ways:

Open the PC Buckle first then take down the metal shelf;

Uncover the film edge slightly, then tear off it slowly and vertically, make sure not to bend it.

Trade terms:

Attentions:

1.Wipe clean the wall if there is water, oil or wax before installation.

2. Original adhesion will be recovery after cleaning if adhesion is not good with dust sticker on it.

3. Don’t hang the Antiques, Fragile, Dangerous goods or over-weight use.

4. Don’t install on the surface that temperature is more than 50 Degree Celsius

5. Soft, folded, deformed easily and rather rough surface should not install the magic sticker.

6. Please don’t pull and lunge with sharp objects, to prevent it deformed

7. Avoid direct sunlight, please don’t continue to use it if the products are abnormally changes or not firm sticker.