high tencity polyester woven geotextile - HT

1.reducing civil engeineering overall costs, 2. cost efficiency, 3.high strength,low elongation, 4.corrosion resistance pervious - details see: https://www.buildingsupplieshub.com/high-tencity-polyester-woven-geotextile-10059191

Type: Geotextiles	Place of Origin: China (Mainland)	Brand Name: Shenlian	Model Number: HT
Geotextile Type: Woven Geotextiles	color: white

contact supplier for high tencity polyester woven geotextile

Brief introduction:

Polyyestermultifilament yarns are woven into a stable network.A woven geotextile retain its relative structure during handling,placement and long time service. As needed, geotextile material shall be added stabilizers to make the filaments resistant to ultraviolet light,oxidation and heat. Reducing civil engineering overall costs increases construction project life filtration separation reinforcement,erosion control high strength,low elongation corrosion resistance perviousness easy transportation dimensional stabilization speed construction cost efficiency

PolyesterWoven Geotextile
Material:Polyyester

Color: white
Width:1.06-3.7M
Weight: 270gsm-1700gsm

Tensile strength: 50KN/M-800KN/M

permeability:0.01-0.8S-1

Pore size: 0.06-0.7mm
Elongation: Polypropylene <15%

interweave method:plain, twill etc.

Benefits:filtration,separation,reinforcement,erosion control

Civil and environmental applications: including highways, port facilities, reservoir, transport construction,

waste and chemical management, subgrade engineering, coastal protection works, peninsula shoal

engineering, subsurface drainage ,pile jacketing etc.

MAIN PRODUCTS

(1) High Strength Woven Geotextile

(2)Pile Jacketing

(3)Geotextile Curtain (Silt Curtain)

(4)Concrete Revetment Mattress

(5)Geotextile tube,Geotextile bag

Physical properties	Test method	Unit	Typical Value
Material			Polyester/PET
Color			White
Unit Weight			270	360	540	430	810	1200	1200	1700
Tensile Strength at break MD	ASTM D 4595	KN/M	100	150	150	200	400	300	500	800
Tensile Strength at break CD	ASTM D 4595	KN/M	50	50	150	50	50	300	100	50
Elongation at break MD	ASTM D 4595	%	<=15
Elongation at break CD	ASTM D 4595	%	<=15
Permitivity	ASTM D 4491	S^-1	0.01-0.8
Pore opening size O90	ASTM D 4751	mm	0.06-0.7